How to replace the sway bar bushing on Buick LaCrosse?

The replacement of sway bar bushing insulators begins by safely lifting and supporting the motor vehicle. The procedure starts with unbolting the sway bar bushing insulator clamp bolts on both sides before continuing with the removal of its corresponding clamps. You must remove the left plus right sway bar bushing insulators which are attached to the sway bar. The installation process starts with positioning the left and right side sway bar bushing insulators on the sway bar followed by reattaching their corresponding clamps. Follow all instructions mentioned in the Fastener Notice of the Service Precautions during this operation. You should install the left and right side sway bar bushing insulator clamp bolts before tightening them to 38 Nm (28 ft. lbs.). Finally, lower the vehicle.

How to service and repair the sway bar bushing on Buick Regal?

The first step to service and repair the sway bar bushing starts with raising and supporting the vehicle. Before proceeding access the sway bar shaft insulator brackets by turning the tires and subsequently undo their left and right bolts which allows safe removal of the brackets. The next step is to extract both left and right side sway bar shaft insulators from sway bar positions. Installation requires first installing the sway bar shaft insulators to the shaft followed by securing the left and right side sway bar shaft insulator brackets. The procedure requires following the fastener notice in service precautions while installing left and right side sway bar shaft insulator bracket bolts with a torque of 48 Nm (35 inch lbs.). Finally, lower the vehicle.

OEM Buick Sway Bar Bushing

Stabilizer Sway Bar Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

82 Sway Bar Bushings found

View related parts
Buick Stabilizer Bar Bushing Part Number: 10351313
$9.37 MSRP: $16.76
You Save: $7.39 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Suspension Stabilizer Bar Bushing Kit; Stabilizer Bushing Kit; Sway Bar Bushing; Stabilizer Bar Insulator; Bushings
- Position: Rear
Fits the following Buick Models:
- LaCrosse | 2005-2009 | CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
Buick Stabilizer Bar Bushing Part Number: 10351312
$9.16 MSRP: $16.36
You Save: $7.20 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Suspension Stabilizer Bar Bushing Kit; Stabilizer Bushing Kit; Sway Bar Bushing; Stabilizer Bar Insulator; Bushings
- Position: Rear
- Replaces: 10284253
Fits the following Buick Models:
- Century | 1997-2004 | Custom, Limited | 6 Cyl 3.1 L GAS
- LaCrosse | 2005-2009 | CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
- Regal | 1997-2004 | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View More
View related parts
Buick Stabilizer Bar Insulator Part Number: 15070009
$8.99 MSRP: $16.06
You Save: $7.07 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Suspension Stabilizer Bar Bushing Kit; Stabilizer Bushing Kit; Sway Bar Bushing; Bushings
- Position: Rear
- Replaces: 15159602
Fits the following Buick Models:
- Rainier | 2004-2007 | CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
Buick Stabilizer Bar Bushing, Rear Part Number: 13281790
$8.19 MSRP: $14.61
You Save: $6.42 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator-Rear Stabilizer Shaft; Sway Bar Bushing; Bushings; Insulator, Stabilizer Shaft
- Position: Rear
Fits the following Buick Models:
- LaCrosse | 2010-2016 | Base, Convenience, CX, CXL, CXS, Leather, Premium, Sport Touring, Touring | 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
- Regal | 2012-2017 | Base, GS, Premium, Sport Touring | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Stabilizer Link Bushing Part Number: 14094462
$4.36 MSRP: $10.59
You Save: $6.23 (59%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Sway Bar Bushing; Stabilizer Bar Insulator; Stabilizer Shaft Bushing; Bushings
Fits the following Buick Models:
- Roadmaster | 1991-1996 | Base, Collector's Edition, Estate Wagon, Estate Wagon Collector's Edition, Limited, Limited Collector's Edition | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Buick Stabilizer Bar Bushing Part Number: 25524941
$3.59 MSRP: $10.72
You Save: $7.13 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Sway Bar Bushing; Sway Bar Link; Link; Bushing; Bushings
- Position: Front
Fits the following Buick Models:
- LeSabre | 1986-1999 | Base, Custom, Limited, T-Type | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Stabilizer Bar Bushing Part Number: 15852293
$4.26 MSRP: $8.01
You Save: $3.75 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Suspension Stabilizer Bar Bushing Kit; Stabilizer Bushing Kit; Sway Bar Bushing; Bushings
- Position: Front
- Replaces: 10356434, 25895203
Fits the following Buick Models:
- Lucerne | 2009-2011 | CX, CXL, CXL Special Edition, Super | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
Buick Stabilizer Bar Bushing Part Number: 14086831
$8.78 MSRP: $13.00
You Save: $4.22 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Suspension Stabilizer Bar Bushing Kit; Sway Bar Link.; Link Kit; Link; Bushing; Bushings
- Position: Front
Fits the following Buick Models:
- Electra | 1985-1990 | Limited, Park Avenue, Park Avenue Ultra, T-Type | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL
- LeSabre | 1986-1999 | Base, Custom, Limited, T-Type | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
- Park Avenue | 1991-1996 | Base, Ultra | 6 Cyl 3.8 L GAS
View More
View related parts
Buick Stabilizer Bar Bushing Part Number: 13281788
$8.75 MSRP: $16.43
You Save: $7.68 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Sway Bar Bushing; Bushings
- Position: Rear
Fits the following Buick Models:
- Regal | 2012-2017 | Base, GS, Premium, Sport Touring | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick INSULATOR-STAB SHAFT LINK Part Number: 06270752
$1.09 MSRP: $1.72
You Save: $0.63 (37%)
ADD TO CART
Product Specifications
- Other Name: Stabilizer Link Bushing; Strut Mount Bushing; Stabilizer Link Kit; Insulator; Shock Absorber/Strut; Steering Anti-Shock.
Fits the following Buick Models:
- Park Avenue | 1997-2005 | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Stabilizer Link Bushing, Front Part Number: 473742
$13.11
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator-Front Stabilizer Shaft; Insulator, Stabilizer Shaft
- Position: Front
Fits the following Buick Models:
- Roadmaster | 1993 | Base, Limited | 8 Cyl 5.7 L GAS
View related parts
Buick Lower Control Arm Bushing Part Number: 6270752
$1.18 MSRP: $1.86
You Save: $0.68 (37%)
Product Specifications
- Other Name: Insulator-Stabilizer Shaft Link; Control Arm Bushing; Axle Pivot Bushing; Stabilizer Link Bushing; Strut Mount Bushing; Stabilizer Link Kit; Insulator; Shock Absorber/Strut; Steering Anti-Shock.
Fits the following Buick Models:
- LeSabre | 1992-1999 | Custom, Limited | 6 Cyl 3.8 L GAS
- Lucerne | 2006-2011 | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
- Park Avenue | 1997-2005 | Base, Ultra | 6 Cyl 3.8 L GAS
- Regal | 1988-1991 | Custom, Gran Sport, Limited | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
- Riviera | 1995-1999 | Base | 6 Cyl 3.8 L GAS
- Roadmaster | 1991-1996 | Base, Collector's Edition, Estate Wagon, Estate Wagon Collector's Edition, Limited, Limited Collector's Edition | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- Skylark | 1992-1994, 1986-1987 | Custom, Gran Sport, Limited | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS
- Somerset | 1986-1987 | Custom, Limited, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
- Somerset Regal | 1985 | Base, Limited | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View More
View related parts
Buick Stabilizer Bar Bushing, Black Part Number: 1628813
Product Specifications
- Other Name: Insulator *Black; Sway Bar Bushing; Link Bushing; Stabilizer Bar Inner Bushing; Mounting Bushing; Insulator.
Fits the following Buick Models:
- Reatta | 1988-1991 | Base | 6 Cyl 3.8 L GAS
- Riviera | 1986-1993 | Luxury, T-Type | 6 Cyl 3.8 L GAS
View related parts
Buick Stabilizer Bar Bushing, Rear Part Number: 10018197
Product Specifications
- Other Name: Insulator-Rear Stabilizer Shaft; Sway Bar Bushing; Clamp Bushing; Stabilizer Bar Inner/Outer Bushing; Insulator; Stabilizer Shaft
- Position: Rear
Fits the following Buick Models:
- Skyhawk | 1984-1989 | Custom, Limited, SE, Sport, T-Type | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
- Skylark | 1985-1989 | Custom, Limited | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
- Somerset | 1986-1987 | Custom, Limited, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
- Somerset Regal | 1985 | Base, Limited | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View More
View related parts
Buick Stabilizer Link Bushing, Rear Part Number: 10049741
Product Specifications
- Other Name: Insulator-Rear Stabilizer Shaft; Sway Bar Bushing; Stabilizer Link Inner Bushing; Stabilizer Link Insulator; Bracket; Bushings; Insulator, Stabilizer Shaft
- Position: Rear
Fits the following Buick Models:
- Regal | 1988-1996 | Custom, Gran Sport, Limited, Olympic Gold Edition | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Stabilizer Bar Outer Bushing, Rear Part Number: 10242081
Product Specifications
- Other Name: Insulator-Rear Stabilizer Shaft; Sway Bar Bushing; Stabilizer Bar Insulator; Bushings; Insulator, Stabilizer Shaft
- Position: Rear
Fits the following Buick Models:
- Regal | 1995-1996 | Custom, Gran Sport, Limited, Olympic Gold Edition | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Stabilizer Bar Bushing Part Number: 10284182
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Sway Bar Bushing; Stabilizer Bar Inner Bushing; Stabilizer Bar Insulator
- Position: Front
- Replaces: 10233858, 14087734
Fits the following Buick Models:
- Regal | 1988-1996 | Custom, Gran Sport, Limited, Olympic Gold Edition | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Stabilizer Bar Bushing, Orange, Front Part Number: 3545380
Product Specifications
- Other Name: Insulator-Front Stabilizer Shaft *Orange; Sway Bar Bushing; Stabilizer Assembly Bushing; Bushings; Insulator, Stabilizer Shaft
- Position: Front
Fits the following Buick Models:
- Riviera | 1992-1993 | Luxury | 6 Cyl 3.8 L GAS
View related parts
Buick Stabilizer Bar Bushing Part Number: 10030872
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Sway Bar Bushing; Stabilizer Bushing; Stabilizer Bar Outer Bushing; Stabilizer Bar Insulator; Bushings
Fits the following Buick Models:
- Skyhawk | 1984-1989 | Custom, Limited, SE, Sport, T-Type | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
- Skylark | 1993-1994, 1986-1991 | Base, Custom, Gran Sport, Limited, Luxury Edition | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS
- Somerset | 1986-1987 | Custom, Limited, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
- Somerset Regal | 1985 | Base, Limited | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View More
View related parts
Buick Stabilizer Bar Bushing, White, Front Part Number: 3545378
Product Specifications
- Other Name: Insulator-Front Stabilizer Shaft *White; Sway Bar Bushing; Bushings; Insulator, Stabilizer Shaft
- Position: Front
Fits the following Buick Models:
- Riviera | 1990-1993 | Luxury | 6 Cyl 3.8 L GAS

| Page 1 of 5 |Next >

1-20 of 82 Results

Buick Sway Bar Bushing

Choose OEM Sway Bar Bushing, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Buick's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Buick Sway Bar Bushing. You can shop at highly competitive prices and protect your budget. All our genuine Buick parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Buick Sway Bar Bushing Parts and Q&A

Stabilizer Bar Bushing
10351312
Q: How to replace the sway bar bushing on Buick LaCrosse?
A:
The replacement of sway bar bushing insulators begins by safely lifting and supporting the motor vehicle. The procedure starts with unbolting the sway bar bushing insulator clamp bolts on both sides before continuing with the removal of its corresponding clamps. You must remove the left plus right sway bar bushing insulators which are attached to the sway bar. The installation process starts with positioning the left and right side sway bar bushing insulators on the sway bar followed by reattaching their corresponding clamps. Follow all instructions mentioned in the Fastener Notice of the Service Precautions during this operation. You should install the left and right side sway bar bushing insulator clamp bolts before tightening them to 38 Nm (28 ft. lbs.). Finally, lower the vehicle.
Stabilizer Bar Bushing, Green
10284149
Q: How to service and repair the sway bar bushing on Buick Regal?
A:
The first step to service and repair the sway bar bushing starts with raising and supporting the vehicle. Before proceeding access the sway bar shaft insulator brackets by turning the tires and subsequently undo their left and right bolts which allows safe removal of the brackets. The next step is to extract both left and right side sway bar shaft insulators from sway bar positions. Installation requires first installing the sway bar shaft insulators to the shaft followed by securing the left and right side sway bar shaft insulator brackets. The procedure requires following the fastener notice in service precautions while installing left and right side sway bar shaft insulator bracket bolts with a torque of 48 Nm (35 inch lbs.). Finally, lower the vehicle.