To service and repair the defroster actuator, start by removing the right instrument panel insulator panel and the i/p compartment. Disconnect defroster actuator vacuum lines and the orange vacuum one from recirculation actuator, then apply the hand Vacuum Pump. Take down the defroster actuator from the way it is fixed to the hvac module case. With the hand Vacuum Pump , pop the recirculation actuator door all the way up, retrieve the defroster actuator and rotate it to the right and pull up into the small space between the back of the dash, and the hvac module. Depress the arm of the defroster door and remove the defroster actuator. For installation, connect the defroster actuator to the defroster door arm and snap it on the hvac module. Connect the vacuum line to the actuator, hydrate the pump , and reconnect the Vacuum Pump to the recirculation actuator. Lastly, re-install the i/p compartment and the right instrument insulator panel.