How to replace the Power Steering Hose on Buick Enclave?

You need to start the replacement of the Power Steering Cooler pipe/hose by taking out the right front frontwards wheelhouse liner. Drain pans should be positioned under the vehicle as required. You should first loosen the Power Steering Cooler pipe clamp while disconnecting the Power Steering Cooler pipe from its attachment point at the power steering fluid cooler. The power steering gear needs its outlet hose bracket bolt removed along with discarding its outlet hose clamp. Disconnect the Power Steering Cooler pipe from the power steering gear outlet hose (4,3) while removing all plastic retaining clips on the Power Steering Cooler pipe. Discard those clips along with the connection. Extract the Power Steering Cooler pipe from the motor vehicle. The new Power Steering Cooler pipe requires positioning according to specifications followed by installation of a new Power Steering Cooler pipe clamp. The Power Steering Cooler pipe requires connection to the power steering gear outlet hose (4,3) according to fastener caution guidelines. Screw and tighten the power steering gear outlet hose bracket bolt to a torque of 8 nm (71 lb in). Attach the Power Steering Cooler pipe to the power steering fluid cooler while at the same time tightening the Power Steering Cooler pipe clamp. The installer should both drain excess fluid and empty the specified pans before putting back the right front frontwards wheelhouse liner. Bleeding the power steering system together with filling it marks the end of the installation process.

How to Replace a Power Steering Hose and Ensure Proper Installation on Buick Regal?

The first step for replacing the P/S Cooler Pipe/Hose involves raising and supporting the vehicle while placing a drain pan beneath it. Start by removing the tire-wheel assembly before detaching power steering return hoses from the power steering cooler pipe. Start by pulling out the power steering cooler pipe from the retaining clips attached to the frame before removing it from the vehicle. To install the power steering cooler pipe position it into the frame retaining clips followed by reattaching the power steering return hoses to the cooler pipe. Reposition the tire and wheel then discard the drain pan followed by lowering the vehicle. The next steps require filling the power steering fluid reservoir then performing a power steering system bleed followed by conducting a leak inspection of the system.

OEM Buick Power Steering Hose

Power Steering Pressure Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

246 Power Steering Hoses found

View related parts
Buick Power Steering Pressure Hose Part Number: 26025653
$142.08 MSRP: $223.56
You Save: $81.48 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Steering Gear Oil Pressure
Fits the following Buick Models:
- Regal | 1989-1991 | Custom, Gran Sport, Limited | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS
View related parts
Buick Power Steering Return Hose Part Number: 26028157
$32.56 MSRP: $51.00
You Save: $18.44 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose-Power Steering Fluid Reservoir Inlet; Power Steering Hose; Return Hose; Hose, Steering Gear Oil Return
Fits the following Buick Models:
- Regal | 1992-1993 | Custom, Limited | 6 Cyl 3.1 L GAS
View related parts
Buick Power Steering Return Hose Part Number: 26069520
$17.04 MSRP: $39.56
You Save: $22.52 (57%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose-Power Steering Fluid Reservoir Inlet; Power Steering Hose; Return Hose; Hose, Steering Gear Oil Return
- Replaces: 26027583
Fits the following Buick Models:
- Regal | 1994-1996 | Custom | 6 Cyl 3.1 L GAS
View related parts
Buick Power Steering Return Hose Part Number: 20967384
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Outlet; Return Hose; Hose, Steering Gear Oil Return
- Replaces: 13230358
Fits the following Buick Models:
- Regal | 2011-2013 | CXL, GS, Premium | 4 Cyl 2.0 L FLEX
View related parts
Buick Pipe Kit, Driver Side Part Number: 26031076
Product Specifications
- Other Name: Pipe Kit, Steering Gear Oil Pressure; Power Steering Hose; Line Kit
- Position: Driver Side
Fits the following Buick Models:
- Century | 1997-2003 | Custom, Limited | 6 Cyl 3.1 L GAS
- Regal | 1997-2003 | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
Buick Power Steering Return Hose Part Number: 25525950
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Outlet; Power Steering Hose; Outlet Hose; Hose, Steering Gear Oil Return
Fits the following Buick Models:
- Skylark | 1988 | Custom, Limited | 6 Cyl 3.0 L GAS
View related parts
Buick Power Steering Return Hose Part Number: 26001768
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Outlet; Power Steering Hose; Outlet Hose; Return Hose; Hose, Steering Gear Oil Return
Fits the following Buick Models:
- Century | 1984-1988 | Custom, Estate, Estate Wagon, Limited, Olympia Limited, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL
View related parts
Buick Power Steering Return Hose Part Number: 26027298
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Outlet; Power Steering Hose; Outlet Hose; Return Hose; Hose, Steering Gear Oil Return
Fits the following Buick Models:
- Skylark | 1989-1991 | Base, Custom, Gran Sport, Limited, Luxury Edition | 4 Cyl 2.5 L GAS
View related parts
Buick Return Hose Part Number: 26019672
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Outlet; Power Steering Hose; Hose, Steering Gear Oil Return
Fits the following Buick Models:
- Regal | 1990-1991 | Custom, Gran Sport, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick Power Steering Return Hose Part Number: 26001782
Product Specifications
- Other Name: Hose, Steering Gear Oil Return; Power Steering Hose; Outlet Hose; Return Hose
Fits the following Buick Models:
- Century | 1984-1987 | Custom, Estate Wagon, Limited | 6 Cyl 2.8 L GAS
View related parts
Buick Pipe Kit Part Number: 88965519
Product Specifications
- Other Name: Pipe Kit, Hydraulic Steering Gear Pressure; Power Steering Hose; Pipe Kit, Steering Gear Oil Pressure
Fits the following Buick Models:
- LaCrosse | 2005-2009 | CXS, Super | 6 Cyl 3.6 L GAS, 8 Cyl 5.3 L GAS
View related parts
Buick Power Steering Return Hose Part Number: 26006690
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Outlet; Power Steering Hose; Outlet Hose; Return Hose; Upper/Lower Pressure/Return Hose; Steering Gear Oil Pressure/Return Hose.
Fits the following Buick Models:
- Skylark | 1989-1993 | Base, Custom, Gran Sport, Limited, Luxury Edition | 4 Cyl 2.3 L GAS, 6 Cyl 3.3 L GAS
View related parts
Buick Power Steering Return Hose Part Number: 26002714
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Outlet; Power Steering Hose; Outlet Hose; Return Hose; Hose, Steering Gear Oil Return
Fits the following Buick Models:
- Century | 1988-1992 | Custom, Estate Wagon, Limited, Special | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Inlet Hose Part Number: 20967372
Product Specifications
- Other Name: Hose-Power Steering Fluid Reservoir Inlet; Power Steering Hose; Power Steering Suction Hose; Hose, Steering Gear Oil Return
- Replaces: 13281432
Fits the following Buick Models:
- Regal | 2011-2013 | Base, CXL, GS, Premium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Power Steering Return Hose Part Number: 26023904
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Outlet; Power Steering Hose; Outlet Hose; Return Hose; Hose, Steering Gear Oil Return
Fits the following Buick Models:
- Skylark | 1988-1990 | Custom, Gran Sport, Limited, Luxury Edition | 4 Cyl 2.3 L GAS
View related parts
Buick Upper Pressure Hose Part Number: 26031205
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Outlet; Power Steering Hose; Lower Return Hose; Upper Return Hose; Hose, Steering Gear Oil Return
Fits the following Buick Models:
- Skylark | 1993 | Custom, Gran Sport, Limited | 4 Cyl 2.3 L GAS, 6 Cyl 3.3 L GAS
View related parts
Buick Power Steering Return Hose Part Number: 26000005
Product Specifications
- Other Name: Pipe Assembly-Power Steering Gear Outlet; Power Steering Hose; Outlet Hose; Return Hose; Pipe, Steering Gear Oil Return
Fits the following Buick Models:
- Century | 1984-1989 | Custom, Estate Wagon, Limited, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL
- Regal | 1988-1991 | Custom, Gran Sport, Limited | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS
View related parts
Buick Pipe Kit, Driver Side Part Number: 26041912
Product Specifications
- Other Name: Pipe Kit, Steering Gear Oil Pressure; Power Steering Hose; Line Kit; Line
- Position: Driver Side
Fits the following Buick Models:
- LeSabre | 1997-1999 | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick Power Steering Pressure Hose Part Number: 7839193
Product Specifications
- Other Name: Hose, Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Steering Gear Oil Pressure
Fits the following Buick Models:
- Regal | 1984-1987 | Base, Limited | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS
View related parts
Buick Power Steering Pressure Hose Part Number: 7849858
Product Specifications
- Other Name: Hose, Power Steering Gear Inlet; Power Steering Hose; Hose, Steering Gear Oil Pressure
Fits the following Buick Models:
- Regal | 1986-1987 | Base, GNX, Grand National, Limited, T-Type | 6 Cyl 3.8 L GAS

| Page 1 of 13 |Next >

1-20 of 246 Results

Buick Power Steering Hose

Choose OEM Power Steering Hose, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Buick's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Buick Power Steering Hose. You can shop at highly competitive prices and protect your budget. All our genuine Buick parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Buick Power Steering Hose directs pressurized fluid in order to make the drivers experience light and responsive steering at every turn. Buick has a long history dating back to 1903 but does not want to rest on the laurel, combining whisper-quiet cabins, smooth-sailing tuning, and user-friendly gadgets with a design language that is high-end but does not require a luxury-car price tag. Long highway runs can demonstrate the combination between hushed glass, acoustic insulation and balanced chassis geometry, and concept cars, such as the Wildcat EV, demonstrate that a transition to electric power will not compromise the serene personality that daily commuters are already accustomed to. That badge is an indicator of longevity earned by a century of customer loyalty, and that kindness is what makes one trusting whenever a family flocks in to go on a road trip, teenagers are honing their parallel parking skills, or retirees are hoping to have a comfortable ride that will not shake sore backs. The Power Steering Hose is made using strengthened crimps, steel tubing that cannot be easily corroded, heavyweight synthetic rubber, which connects the pump and the rack, withstands engine heat, resists vibrations, and ensures that the hydraulic pressure does not drop, thus making the wheel turn easily when a tight parking lot requires full-lock turns at low velocity. The Buick Power Steering Hose will endure the extremes of temperature, the foaming of block fluids, the whining noises, the sudden leakages, and provide the same assist mile after mile so that drivers can concentrate on the road rather than dealing with the wheel.

Buick Power Steering Hose Parts and Q&A

Pipe Kit
20887540
Q: How to replace the Power Steering Hose on Buick Enclave?
A:
You need to start the replacement of the Power Steering Cooler pipe/hose by taking out the right front frontwards wheelhouse liner. Drain pans should be positioned under the vehicle as required. You should first loosen the Power Steering Cooler pipe clamp while disconnecting the Power Steering Cooler pipe from its attachment point at the power steering fluid cooler. The power steering gear needs its outlet hose bracket bolt removed along with discarding its outlet hose clamp. Disconnect the Power Steering Cooler pipe from the power steering gear outlet hose (4,3) while removing all plastic retaining clips on the Power Steering Cooler pipe. Discard those clips along with the connection. Extract the Power Steering Cooler pipe from the motor vehicle. The new Power Steering Cooler pipe requires positioning according to specifications followed by installation of a new Power Steering Cooler pipe clamp. The Power Steering Cooler pipe requires connection to the power steering gear outlet hose (4,3) according to fastener caution guidelines. Screw and tighten the power steering gear outlet hose bracket bolt to a torque of 8 nm (71 lb in). Attach the Power Steering Cooler pipe to the power steering fluid cooler while at the same time tightening the Power Steering Cooler pipe clamp. The installer should both drain excess fluid and empty the specified pans before putting back the right front frontwards wheelhouse liner. Bleeding the power steering system together with filling it marks the end of the installation process.
Power Steering Return Hose
10329335
Q: How to Replace a Power Steering Hose and Ensure Proper Installation on Buick Regal?
A:
The first step for replacing the P/S Cooler Pipe/Hose involves raising and supporting the vehicle while placing a drain pan beneath it. Start by removing the tire-wheel assembly before detaching power steering return hoses from the power steering cooler pipe. Start by pulling out the power steering cooler pipe from the retaining clips attached to the frame before removing it from the vehicle. To install the power steering cooler pipe position it into the frame retaining clips followed by reattaching the power steering return hoses to the cooler pipe. Reposition the tire and wheel then discard the drain pan followed by lowering the vehicle. The next steps require filling the power steering fluid reservoir then performing a power steering system bleed followed by conducting a leak inspection of the system.