How to replace the right engine mount bracket on Buick Park Avenue?

A replacement of the right Engine Mount Bracket requires the vehicle to be raised along with appropriate vehicle support while the right front fascia extension needs removal. A suitable jack supports the engine assembly for removal of the right Engine Mount Bracket nut that connects the right Engine Mount to its respective bracket. Begin by dropping the engine slightly and remove the right Engine Mount Bracket fasteners which connect it to the engine to permit removal of the right Engine Mount Bracket stud and finally remove the right Engine Mount Bracket. To install the right Engine Mount Bracket fit it onto the right Engine Mount stud of the engine while using thread lock compound gm p/n 12345493 (Canadian P/N 10953488) or equivalent on right Engine Mount Bracket bolts. Use loose fasteners to attach the two lower right Engine Mount Bracket bolts while applying thread lock compound gm p/n 12345493 (Canadian P/N 10953488) or equivalent to the right Engine Mount Bracket stud. The right Engine Mount Bracket stud needs to be installed to the engine with 8 nm (71 inch lbs.) torque until completion of right Engine Mount Bracket nut installation at 60 nm (44 ft. Lbs.). Lift up the engine to proper positioning before securing the right Engine Mount to the right Engine Mount Bracket using a 80 nm (59 ft.lbs) torque setting. To finish the procedure you need to remove the engine support jack while reinstalling the right front fascia extension followed by lowering the vehicle.

OEM Buick Park Avenue Engine Mount Bracket

Engine Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Engine Mount Brackets found

View related parts
Buick Park Avenue Transmission Mount Part Number: 25736430
$87.67 MSRP: $137.33
You Save: $49.66 (37%)
ADD TO CART
Product Specifications
- Other Name: Mount, Transmission Mounting; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Front Mount; Front Bracket; Mount
- Position: Front
- Replaces: 25706431
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Motor Mount, Passenger Side Part Number: 25710672
Product Specifications
- Other Name: Mount; Engine Mount Bracket; Transfer Case Mount; Transmission Mount; Mount, Engine Mount Dampening; Mount, Engine Mounting
- Position: Passenger Side
- Replaces: 25638464, 25681326, 25715770, 25695085, 25695931, 25691731, 25713699
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Motor Mount Part Number: 22146628
Product Specifications
- Other Name: Mount Assembly-Engine; Engine Mount Bracket; Engine Mount; Front Mount; Mount; Mount, Engine Mount Dampening
- Replaces: 22145817, 22185818
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1996 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Support Part Number: 25740662
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Transmission Mount; Motor Mount; Bracket
- Replaces: 25647356
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Mount Bracket Part Number: 25685989
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount; Motor Mount Bracket; Support
- Replaces: 22145826
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Support Part Number: 25665830
Product Specifications
- Other Name: Bracket, Engine Mounting
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1999 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Engine Bracket, Driver Side Part Number: 25620949
Product Specifications
- Other Name: Support, Engine Mounting; Engine Mount Bracket; Engine Support Brace; Front Support; Reinforcement Support; Side Rail Reinforcement; Side Rail Support; Support
- Position: Driver Side
- Replaces: 25623908
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1996 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Motor Mount Part Number: 22146252
Product Specifications
- Other Name: Mount Assembly-Engine; Engine Mount Bracket; Mount; Mount, Engine Mount Dampening
- Replaces: 25671191
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1999 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Mount Bracket Part Number: 22145664
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount; Motor Mount Bracket; Support
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Mount Bracket Part Number: 22112242
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Motor Mount Bracket; Support
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1994 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Engine Bracket, Passenger Side Part Number: 20416932
Product Specifications
- Other Name: Support, Engine Mounting; Engine Mount Bracket; Engine Support Brace; Front Support; Reinforcement Support; Side Rail Reinforcement; Side Rail Support; Support
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1996 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS

Buick Park Avenue Engine Mount Bracket

Want to cut long-term maintenance and repair costs? Choose OEM Engine Mount Bracket. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick Park Avenue parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick Park Avenue Engine Mount Bracket includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Engine Mount Bracket for Buick Park Avenue models demonstrates outstanding reliability and performance which maintains critical operation of various Buick Park Avenue automobiles. The Engine Mount Bracket generates efficient vibration damping along with sound deadening effects that assist engine placement within the chassis framework for improved comfort and security during vehicle operation. The Buick Park Avenue receives major advantages from this component which exists to endure everyday driving stresses through its engineering for rigors of daily use. Traditional metal components with rubber insulators and improved fluid-filled hydraulic mounts make up the Engine Mount Bracket which delivers exceptional vibration damping. Modern Buick Park Avenue models use electronic active mounts to automatically modify their stiffness response based on engine speed as part of their efficiency optimization protocols. The Engine Mount Bracket from the Buick Park Avenue offers support to various models through its universal compatibility thus delivering dependable operation between different versions. Safety of the car depends on regular maintenance combined with inspections of Engine Mount Bracket to prevent issues that can emerge from aging and fluid leaks as well as heat exposure. The Buick Park Avenue Engine Mount Bracket stands superior in the automotive sector because of its durable fabrication and elite componentry which establishes it as a vital piece for the the automaker model's engineering achievement and its sustained reputation for luxury combined with reliability.

Buick Park Avenue Engine Mount Bracket Parts and Q&A

Transmission Mount
25736430
Q: How to replace the right engine mount bracket on Buick Park Avenue?
A:
A replacement of the right Engine Mount Bracket requires the vehicle to be raised along with appropriate vehicle support while the right front fascia extension needs removal. A suitable jack supports the engine assembly for removal of the right Engine Mount Bracket nut that connects the right Engine Mount to its respective bracket. Begin by dropping the engine slightly and remove the right Engine Mount Bracket fasteners which connect it to the engine to permit removal of the right Engine Mount Bracket stud and finally remove the right Engine Mount Bracket. To install the right Engine Mount Bracket fit it onto the right Engine Mount stud of the engine while using thread lock compound gm p/n 12345493 (Canadian P/N 10953488) or equivalent on right Engine Mount Bracket bolts. Use loose fasteners to attach the two lower right Engine Mount Bracket bolts while applying thread lock compound gm p/n 12345493 (Canadian P/N 10953488) or equivalent to the right Engine Mount Bracket stud. The right Engine Mount Bracket stud needs to be installed to the engine with 8 nm (71 inch lbs.) torque until completion of right Engine Mount Bracket nut installation at 60 nm (44 ft. Lbs.). Lift up the engine to proper positioning before securing the right Engine Mount to the right Engine Mount Bracket using a 80 nm (59 ft.lbs) torque setting. To finish the procedure you need to remove the engine support jack while reinstalling the right front fascia extension followed by lowering the vehicle.