How to replace the Back Up Light and Tail Light on Buick LeSabre?

Detach the tail/back up lamp harness connector from the body wiring harness as the first step of lamp replacement. Support the rear compartment lid assembly when you remove the tail/back up lamp assembly before unplugging and removing the tail/back up lamp harness grommet from the lid and the tail/back up lamp from your vehicle. Insert the tail/back up lamp assembly first before installing the rear compartment lid tail/back up lamp harness grommet followed by the tail/back up lamp itself. Screw fasteners to the tail/back up lamp studs while making sure to tighten them to 6 N.m (53 lb in) according to the Fastener Notice. Use the tail/back up lamp electrical connector and the tail/back up lamp harness connector to follow installation steps which require clipping to the metal edge of the rear compartment lid.

How to properly service and repair the Tail Light on Buick LeSabre?

The rear compartment sill plate must be removed before you tackle a tail lamp replacement. Substitute to following the tail lamp connector and grommet through the body when only the bulb needs replacement. First disconnect the tail lamp connector then push the grommet out of its position in the rear end panel. Detach the fasteners securing the tail lamp assembly to the body before removing the assembly. A counterclockwise twist motion of the tail lamp socket will let you detach it from its position while you replace defective bulbs if needed. Route the tail lamp connector and grommet through the body when the tail lamp removal was performed solely for bulb replacement. Position the grommet completely into the body rear end panel before putting the tail lamp bulb into the socket of the tail lamp. Secure the tail lamp socket by turning it clockwise until its tabs match the notches in the tail lamp assembly. Fasten the tail lamp assembly to the body while tightening the fasteners to 6 n.m (53 lb in). The final step requires a tail lamp connector connection followed by placing the rear compartment sill plate back into position.

OEM Buick LeSabre Tail Light

Tail Lamp

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

18 Tail Lights found

View related parts
Buick LeSabre Tail Lamp Assembly, Passenger Side Part Number: 15228560
$159.67 MSRP: $238.71
You Save: $79.04 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp Assembly-Tail; Tail Light Assembly; Back Up Light; Tail Lamps; Tail Light; Lamp, Tail Lamp
- Position: Passenger Side
- Replaces: 16530508
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2005 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Backup Lamp Assembly Part Number: 19208064
$487.33 MSRP: $691.39
You Save: $204.06 (30%)
ADD TO CART
Product Specifications
- Other Name: Lamp, Back Up Lamp; Lamp, License Plate; Lamp, Tail Lamp
- Position: Rear
- Replaces: 05978596, 15228561, 25718672, 5978596, 05978592, 5978592
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Backup Lamp Bulb Part Number: 142456
$1.13 MSRP: $2.13
You Save: $1.00 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb-Back Up Lamp; Back Up Light Bulb; Tail Light Bulbs; Car Bulbs; Bulb; High Mount Stop Lamp, Tail Lamp; B/U Lamp, Tail Lamp; Standard Parts; Tail Lamp
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1996 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Backup Lamp Assembly, Rear Part Number: 5978403
Product Specifications
- Other Name: Lamp Assembly-Back Up & Tail (W/ Rear License Plate Pocket); Lamp, Back Up Lamp
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1999 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Backup Lamp Assembly Part Number: 5977922
Product Specifications
- Other Name: Lamp Assembly-Back Up; Lamp, Back Up Lamp
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1996 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Tail Lamp Assembly, Passenger Side Part Number: 5977652
Product Specifications
- Other Name: Lamp Assembly-Tail; Back Up Light; Tail Light; Lamp, Tail Lamp
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1996 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Tail Lamp Assembly, Driver Side Part Number: 5977651
Product Specifications
- Other Name: Lamp Assembly-Tail; Back Up Light; Tail Light; Lamp, Tail Lamp
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1996 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Tail Lamp Assembly, Rear Passenger Side Part Number: 5975668
Product Specifications
- Other Name: Lamp Assembly-Combination Rear (Right-Hand); Back Up Light; Tail Light; Lamp, Tail Lamp
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1991 Buick LeSabre | Base, Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Tail Lamp Assembly, Rear Driver Side Part Number: 5975667
Product Specifications
- Other Name: Lamp Assembly-Combination Rear (Left-Hand); Back Up Light; Tail Light; Lamp, Tail Lamp
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1991 Buick LeSabre | Base, Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Tail Lamp Assembly, Passenger Side Part Number: 5974114
Product Specifications
- Other Name: Lamp Assembly-Rear (Right-Hand) Source: P; Back Up Light; Tail Light; Lamp, Tail Lamp
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1989 Buick LeSabre | Base, Custom, Limited | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Tail Lamp Assembly, Driver Side Part Number: 5974113
Product Specifications
- Other Name: Lamp Assembly-Rear (Left-Hand) Source: P; Back Up Light; Tail Light; Lamp, Tail Lamp
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1989 Buick LeSabre | Base, Custom, Limited | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Tail Lamp Assembly, Driver Side Part Number: 19244607
Product Specifications
- Other Name: Lamp Assembly, Tail; Back Up Light; Tail Light; Lamp, Tail Lamp
- Position: Driver Side
- Replaces: 16530243, 5978589, 05978589
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Tail Lamp Assembly, Passenger Side Part Number: 19244606
Product Specifications
- Other Name: Lamp Assembly, Tail; Back Up Light; Tail Light; Lamp, Tail Lamp
- Position: Passenger Side
- Replaces: 05978590, 5978590, 16530244
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Tail Lamp Assembly, Passenger Side Part Number: 19169007
Product Specifications
- Other Name: Lamp Assembly, Tail; Tail Light; Lamp, Tail Lamp
- Position: Passenger Side
- Replaces: 05978434, 05978282, 5978434, 5978282
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1999 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Tail Lamp Assembly, Driver Side Part Number: 19169006
Product Specifications
- Other Name: Lamp Assembly, Tail; Tail Light; Lamp, Tail Lamp
- Position: Driver Side
- Replaces: 05978433, 05978281, 5978281, 5978433
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1999 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Lens, Passenger Side Part Number: 16501959
Product Specifications
- Other Name: Lens, Tail Lamp; Tail Light Lens
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1985 Buick LeSabre | Collector's Edition, Custom, Limited | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Buick LeSabre Backup Lamp Assembly Part Number: 19208063
$174.25 MSRP: $260.52
You Save: $86.27 (34%)
Product Specifications
- Other Name: Lamp, Back Up Lamp; Lamp, License Plate; Lamp, Tail Lamp
- Position: Rear
- Replaces: 15228562, 25737018
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2004 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Tail Lamp Assembly, Driver Side Part Number: 15228559
$143.09 MSRP: $213.93
You Save: $70.84 (34%)
Product Specifications
- Other Name: Lamp Assembly-Tail; Tail Light Assembly; Back Up Light; Tail Lamps; Tail Light; Lamp, Tail Lamp
- Position: Driver Side
- Replaces: 16530507
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2005 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS

Buick LeSabre Tail Light

Want to cut long-term maintenance and repair costs? Choose OEM Tail Light. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick LeSabre parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick LeSabre Tail Light includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Buick LeSabre Tail Light is a crucial part that defines the characteristics of the Buick vehicles, regarding their dependability and functionality. Serving as an important element in the car's safety and functionality, the tail lights of a LeSabre model have been produced and actively used from 1959 to 2005. Manufactured and constructed to factory specifications needed for automotive use, the Buick LeSabre Tail Light brightens the vehicle's surroundings at night; others on the road can easily notice when the car is making stops or turns hence minimizing on the chances of an accident. Suitable for different models of LeSabre, these tail lights are of different types and multiple functions such as the rear position lamp, stop lamp and center high mount stop lamp which are essential parts of the safety mechanism of any vehicle. Some designs incorporate modern features like LED and fiber optics which also improves visibility, and gives the car a updated LeSabre look. Moreover, the Euro tail lights make car' appearance more personalized and reflect owners' individuality, though sticking to the superior quality characteristic of Buick. The Buick LeSabre Tail Light indeed adds to the beauty and elegance of the automobile but also adds to the stability and capability of the model which is very important in automotive engineering. Hence, the unusual history and high level of safety that surround the Buick LeSabre Tail Light will always be considered a great component which carries on the traditions of the Buick company.

Buick LeSabre Tail Light Parts and Q&A

Tail Lamp Assembly, Driver Side
15228559
Q: How to replace the Back Up Light and Tail Light on Buick LeSabre?
A:
Detach the tail/back up lamp harness connector from the body wiring harness as the first step of lamp replacement. Support the rear compartment lid assembly when you remove the tail/back up lamp assembly before unplugging and removing the tail/back up lamp harness grommet from the lid and the tail/back up lamp from your vehicle. Insert the tail/back up lamp assembly first before installing the rear compartment lid tail/back up lamp harness grommet followed by the tail/back up lamp itself. Screw fasteners to the tail/back up lamp studs while making sure to tighten them to 6 N.m (53 lb in) according to the Fastener Notice. Use the tail/back up lamp electrical connector and the tail/back up lamp harness connector to follow installation steps which require clipping to the metal edge of the rear compartment lid.
Tail Lamp Assembly, Passenger Side
15228560
Q: How to properly service and repair the Tail Light on Buick LeSabre?
A:
The rear compartment sill plate must be removed before you tackle a tail lamp replacement. Substitute to following the tail lamp connector and grommet through the body when only the bulb needs replacement. First disconnect the tail lamp connector then push the grommet out of its position in the rear end panel. Detach the fasteners securing the tail lamp assembly to the body before removing the assembly. A counterclockwise twist motion of the tail lamp socket will let you detach it from its position while you replace defective bulbs if needed. Route the tail lamp connector and grommet through the body when the tail lamp removal was performed solely for bulb replacement. Position the grommet completely into the body rear end panel before putting the tail lamp bulb into the socket of the tail lamp. Secure the tail lamp socket by turning it clockwise until its tabs match the notches in the tail lamp assembly. Fasten the tail lamp assembly to the body while tightening the fasteners to 6 n.m (53 lb in). The final step requires a tail lamp connector connection followed by placing the rear compartment sill plate back into position.