How to Change the Back Up Light and Tail Light on a Buick LeSabre?

The body wiring harness connector must be detached from the tail/back up lamp harness for this replacement work. Begin by removing the tail/back up lamp assembly from the rear compartment lid while you support it through the process of unplugging the tail/back up lamp harness grommet from the lid. Afterwards, take out the lamp completely from the vehicle. Support the tail/back up lamp assembly after installing the tail/back up lamp harness grommet to the rear compartment lid and securing the tail/back up lamp. Tighten fasteners that secure the tail/back up lamp assembly to its tail/back up lamp studs until they reach 6 N.m (53 lb in) according to the Fastener Notice. After securing the tail/back up lamp electrical connector together with its harness connector make sure to clip the connector to the metal edge of the rear compartment lid.

How to replace the rear back up light and tail light on Buick LeSabre?

Start lamp replacement by disconnecting the tail/back up lamp harness connector which exists between the body wiring harness. Unplug the tail/back up lamp harness grommet from the rear compartment lid when supporting the assembly to remove the lamp from the vehicle. During installation you must support the tail/back up lamp assembly while you install the tail/back up lamp harness grommet to the rear compartment lid followed by the tail/back up lamp. Thread the tail/back up lamp fasteners onto the lamp studs and torque them to 6 N.m (53 lb in). Finish the installation by attaching the tail/back up lamp electrical connector to its metal edge on the rear compartment lid.

OEM Buick LeSabre Back Up Light

Reverse Lamp

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

18 Back Up Lights found

View related parts
Buick LeSabre Tail Lamp Assembly, Passenger Side Part Number: 15228560
$159.67 MSRP: $238.71
You Save: $79.04 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp Assembly-Tail; Tail Light Assembly; Back Up Light; Tail Lamps; Tail Light; Lamp, Tail Lamp
- Position: Passenger Side
- Replaces: 16530508
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2005 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Backup Lamp Assembly Part Number: 19208064
$487.33 MSRP: $691.39
You Save: $204.06 (30%)
ADD TO CART
Product Specifications
- Other Name: Lamp, Back Up Lamp; Lamp, License Plate; Lamp, Tail Lamp
- Position: Rear
- Replaces: 05978596, 15228561, 25718672, 5978596, 05978592, 5978592
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Backup Lamp Bulb Part Number: 142456
$1.13 MSRP: $2.13
You Save: $1.00 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb-Back Up Lamp; Back Up Light Bulb; Tail Light Bulbs; Car Bulbs; Bulb; High Mount Stop Lamp, Tail Lamp; B/U Lamp, Tail Lamp; Standard Parts; Tail Lamp
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1996 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Backup Lamp Bulb Part Number: 103642
Product Specifications
- Other Name: Bulb, Back Up Lamp; Back Up Light Bulb; Tail Light Bulbs; Back Up Light; Car Bulbs; Backup Lamp; Bulb
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1991 Buick LeSabre | Base, Custom, Limited, T-Type | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Backup Lamp Assembly, Rear Part Number: 5978403
Product Specifications
- Other Name: Lamp Assembly-Back Up & Tail (W/ Rear License Plate Pocket); Lamp, Back Up Lamp
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1999 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Backup Lamp Assembly Part Number: 5977922
Product Specifications
- Other Name: Lamp Assembly-Back Up; Lamp, Back Up Lamp
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1996 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Tail Lamp Assembly, Passenger Side Part Number: 5977652
Product Specifications
- Other Name: Lamp Assembly-Tail; Back Up Light; Tail Light; Lamp, Tail Lamp
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1996 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Tail Lamp Assembly, Driver Side Part Number: 5977651
Product Specifications
- Other Name: Lamp Assembly-Tail; Back Up Light; Tail Light; Lamp, Tail Lamp
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1996 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Tail Lamp Assembly, Rear Passenger Side Part Number: 5975668
Product Specifications
- Other Name: Lamp Assembly-Combination Rear (Right-Hand); Back Up Light; Tail Light; Lamp, Tail Lamp
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1991 Buick LeSabre | Base, Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Tail Lamp Assembly, Rear Driver Side Part Number: 5975667
Product Specifications
- Other Name: Lamp Assembly-Combination Rear (Left-Hand); Back Up Light; Tail Light; Lamp, Tail Lamp
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1991 Buick LeSabre | Base, Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Tail Lamp Assembly, Passenger Side Part Number: 5974114
Product Specifications
- Other Name: Lamp Assembly-Rear (Right-Hand) Source: P; Back Up Light; Tail Light; Lamp, Tail Lamp
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1989 Buick LeSabre | Base, Custom, Limited | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Tail Lamp Assembly, Driver Side Part Number: 5974113
Product Specifications
- Other Name: Lamp Assembly-Rear (Left-Hand) Source: P; Back Up Light; Tail Light; Lamp, Tail Lamp
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1989 Buick LeSabre | Base, Custom, Limited | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Tail Lamp Assembly, Driver Side Part Number: 19244607
Product Specifications
- Other Name: Lamp Assembly, Tail; Back Up Light; Tail Light; Lamp, Tail Lamp
- Position: Driver Side
- Replaces: 16530243, 5978589, 05978589
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Tail Lamp Assembly, Passenger Side Part Number: 19244606
Product Specifications
- Other Name: Lamp Assembly, Tail; Back Up Light; Tail Light; Lamp, Tail Lamp
- Position: Passenger Side
- Replaces: 05978590, 5978590, 16530244
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Tail Lamp Assembly, Passenger Side Part Number: 19169007
Product Specifications
- Other Name: Lamp Assembly, Tail; Tail Light; Lamp, Tail Lamp
- Position: Passenger Side
- Replaces: 05978434, 05978282, 5978434, 5978282
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1999 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Tail Lamp Assembly, Driver Side Part Number: 19169006
Product Specifications
- Other Name: Lamp Assembly, Tail; Tail Light; Lamp, Tail Lamp
- Position: Driver Side
- Replaces: 05978433, 05978281, 5978281, 5978433
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1999 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Backup Lamp Assembly Part Number: 19208063
$174.25 MSRP: $260.52
You Save: $86.27 (34%)
Product Specifications
- Other Name: Lamp, Back Up Lamp; Lamp, License Plate; Lamp, Tail Lamp
- Position: Rear
- Replaces: 15228562, 25737018
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2004 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Tail Lamp Assembly, Driver Side Part Number: 15228559
$143.09 MSRP: $213.93
You Save: $70.84 (34%)
Product Specifications
- Other Name: Lamp Assembly-Tail; Tail Light Assembly; Back Up Light; Tail Lamps; Tail Light; Lamp, Tail Lamp
- Position: Driver Side
- Replaces: 16530507
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2005 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS

Buick LeSabre Back Up Light

Want to cut long-term maintenance and repair costs? Choose OEM Back Up Light. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick LeSabre parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick LeSabre Back Up Light includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Buick LeSabre Back Up Light is used car part that acts like part to improve safety andainty for new and old LeSabre models. The Buick LeSabre is an example of one model C is remains popular to this day for its reliable and fast car to be deployed in the market since 1959. The Back Up Light is usually white and very important because it gives other people on the road, drivers of other cars or even pedestrians Mek Feelings 18 awareness of the backward movement of the car reducing on effects of any mishap that may happen and hence a safer drive is achieved. This feature is especially meaningful because with new regulation in place that requires reverse lamp to be white, Buick exemplifies its devotion to safety. Buick LeSabre Back Up Light may be used for various LeSabre models, this makes it ideal for the car owners who wish to maintain their car. Moreover, positive aspects, from a design point of view, are related to the airplane-like LeSabre model and powerful engines like 3.8 L V6. Other magnificent aspects include the EyeCue headlights and StabiliTrak technology that has also attributed to the reputation of the LeSabre in the market. The Buick LeSabre Back Up Light serves more of a practical function but is also symbolic of car which has been admired for is strength and progressive engineering for almost half a century. Therefore, summarizing the above arguments, the Buick LeSabre Back Up Light is a vintage component that epitomizes the company's commitment to safety and performance, and as a result, sets it apart from the competitors.

Buick LeSabre Back Up Light Parts and Q&A

Tail Lamp Assembly, Passenger Side
15228560
Q: How to Change the Back Up Light and Tail Light on a Buick LeSabre?
A:
The body wiring harness connector must be detached from the tail/back up lamp harness for this replacement work. Begin by removing the tail/back up lamp assembly from the rear compartment lid while you support it through the process of unplugging the tail/back up lamp harness grommet from the lid. Afterwards, take out the lamp completely from the vehicle. Support the tail/back up lamp assembly after installing the tail/back up lamp harness grommet to the rear compartment lid and securing the tail/back up lamp. Tighten fasteners that secure the tail/back up lamp assembly to its tail/back up lamp studs until they reach 6 N.m (53 lb in) according to the Fastener Notice. After securing the tail/back up lamp electrical connector together with its harness connector make sure to clip the connector to the metal edge of the rear compartment lid.
Tail Lamp Assembly, Driver Side
19244607
Q: How to replace the rear back up light and tail light on Buick LeSabre?
A:
Start lamp replacement by disconnecting the tail/back up lamp harness connector which exists between the body wiring harness. Unplug the tail/back up lamp harness grommet from the rear compartment lid when supporting the assembly to remove the lamp from the vehicle. During installation you must support the tail/back up lamp assembly while you install the tail/back up lamp harness grommet to the rear compartment lid followed by the tail/back up lamp. Thread the tail/back up lamp fasteners onto the lamp studs and torque them to 6 N.m (53 lb in). Finish the installation by attaching the tail/back up lamp electrical connector to its metal edge on the rear compartment lid.