How to Replace a Coolant Temperature Sensor on Buick Enclave?

When changing the Engine Coolant Temperature Sensor, drain the cooling system using the appropriate. Push the electrical connector heat shield up the wiring harness and remove the engine wiring harness electrical connector from the engine coolant temperature (ECT) sensor. Since this is a service procedure, the ECT sensor is removed from the vehicle and then replaced by another new ECT sensor and tightened (to 22 Nm (16 lb ft)). Another method used is to substitute a new throttle body and bolt it to the engine manifold. Always ensure proper diagnostics are set up before proceeding. The ECT sensor and slide the electrical connector heat shield down over the connector. Connect the engine wiring harness electrical connector to the ECT sensor and slide theistream electrical connector heat shield down over the connector. Finally, deflate the cooling system using the approved filling procedure.

OEM Buick Enclave Coolant Temperature Sensor

Coolant Water Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Coolant Temperature Sensors found

View related parts
Buick Enclave Coolant Temperature Sensor Part Number: 12639899
$28.44 MSRP: $53.40
You Save: $24.96 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Engine Coolant Temperature Sensor; Temperature Sensor; Sensor, Coolant Temperature (Engine Unit)
- Replaces: 12566778
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2017 Buick Enclave | Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS
View related parts
Buick Enclave Coolant Temperature Sensor, Black Part Number: 12608814
$30.66 MSRP: $57.58
You Save: $26.92 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Engine Coolant Temperature *Ite Or Black; Engine Coolant Temperature Sensor; Temperature Sensor; Temperature Sending Unit; Coolant Temperature Sensor; Engine Oil Pressure/Temperature Sensor; Computer Control Sensors
- Replaces: 15369305, 25037062, 12191170, 15326388
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2021 Buick Enclave | Avenir, Base, Essence, Preferred, Premium | 6 Cyl 3.6 L GAS

Buick Enclave Coolant Temperature Sensor

Want to cut long-term maintenance and repair costs? Choose OEM Coolant Temperature Sensor. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick Enclave parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick Enclave Coolant Temperature Sensor includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Coolant Temperature Sensor found usually in Buick Enclave vehicle is an essential element in the regulation of the temperature of the coolant to maintain the performance of the engine. This sensor assists in controlling the operating conditions of the engine because it identifies changes in the coolant temperature. It is possibly that depending on the type or style of the Coolant Temperature Sensors there could be some differences in the such type of sensors used in the different models of Enclave; However, the main function of the Coolant Temperature Sensors stays the same for all the models- to regulate the temperature of the engine within safe and efficient level.

Buick Enclave Coolant Temperature Sensor Parts and Q&A

Coolant Temperature Sensor
12639899
Q: How to Replace a Coolant Temperature Sensor on Buick Enclave?
A:
When changing the Engine Coolant Temperature Sensor, drain the cooling system using the appropriate. Push the electrical connector heat shield up the wiring harness and remove the engine wiring harness electrical connector from the engine coolant temperature (ECT) sensor. Since this is a service procedure, the ECT sensor is removed from the vehicle and then replaced by another new ECT sensor and tightened (to 22 Nm (16 lb ft)). Another method used is to substitute a new throttle body and bolt it to the engine manifold. Always ensure proper diagnostics are set up before proceeding. The ECT sensor and slide the electrical connector heat shield down over the connector. Connect the engine wiring harness electrical connector to the ECT sensor and slide theistream electrical connector heat shield down over the connector. Finally, deflate the cooling system using the approved filling procedure.