OEM Buick Enclave Camshaft Position Sensor

Buick Enclave Camshaft Position Sensor Parts and Q&A

• Camshaft Position Sensor
  12684186
  Q: How to replace the Camshaft Position Sensor on Bank 1 (Right Side) Exhaust on Buick Enclave?

  A:

  The first procedure for replacing a Camshaft Position Sensor on Bank 1 (Right Side) Exhaust requires you to unplug the engine wiring harness electrical connector attached to the bank 1 exhaust camshaft position (CMP) sensor. Take off the CMP sensor bolt together with the sensor from the equipment. Begin by installing the CMP sensor together with its bolt and securely tighten the bolt to 10 Nm (89 lb in). Attach the engine wiring harness electrical connector to the bank 1 exhaust CMP sensor before concluding.
• Camshaft Position Sensor
  12608424
  Q: How to Service and Repair the Camshaft Position Sensor on Bank 2 (Left Side) Intake for a Buick Enclave?

  A:

  The first step to replace the Camshaft Position Sensor on bank 2 (Left Side) intake requires removal of the engine mount strut bracket followed by separation of the radiator inlet hose from the water outlet. Start by removing the power steering fluid reservoir bracket bolts from their placements before moving the power steering fluid reservoir bracket to an alternate location. Installments begin by disconnecting the engine wiring harness electrical connector from the bank 2 intake camshaft position (CMP) sensor followed by removing its sensor bolt and sensor. Begin by installing the cmp sensor followed by its bolt and tighten the bolt to achieve 10 n.m (89 lb in). Install the power steering fluid reservoir bracket by connecting its engine wiring harness electrical connector to bank 2 intake cmp sensor followed by securing the bracket with bolts which should be tightened to 9 n.m (8 lb in). Reposition both the radiator inlet hose towards the water outlet as well as the engine mount strut bracket.