How to replace the Automatic Transmission Shifter lever on Buick LaCrosse?

Starting the repair of an automatic transmission shift lever requires disabling the restraints system. The shift lever seal needs to slide upwards along the shift lever before the removal of steering column trim covers becomes necessary. The customer should disconnect the shift lever connector which sits beneath the column base while using tools to uninstall the shift lever screw from the shift lever assembly component. Extraction of the shift lever and its seal from the linear shift assembly needs proper sliding of the shift lever seal towards the narrow section of the shift lever. The narrow end of the shift lever assembly should have the shift lever seal installed before attaching the assembly to the linear shift assembly. Fasten the shift lever screw to the shift lever assembly by tightening it to 20 nm (15 ft. Lbs.). Push the shift lever seal downwards along the shift lever assembly until it properly fits into the steering column trim covers. Enable the restraint system only after reattaching the steering column trim covers when necessary.

How to replace the Automatic Transmission Shifter on Buick Regal?

When replacing an a/t shift lever you must begin by taking out steering column trim covers while rolling back the shift lever boot. The first step involves removing the shift lever screw before proceeding to extract the shift lever assembly followed by removal of the shift lever seal from this assembly. Start your installation steps by setting the shift lever seal onto the shift lever assembly followed by securing it with the shift lever screw tightened to 1.5 nm (13 lb in). The installation process requires proper seating of the shift lever boot inside the trim covers before reinstalling the steering column trim covers.

OEM Buick Automatic Transmission Shifter

AT Shifter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

63 Automatic Transmission Shifters found

View related parts
Buick Lever Part Number: 84004681
$2.67 MSRP: $4.19
You Save: $1.52 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Assembly-Automatic Transmission Range Selector Lever Cable; Lever, Transmission Control
Fits the following Buick Models:
- Regal Sportback | 2018-2020 | Avenir, Base, Essence, GS, Preferred, Preferred II | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
- Regal TourX | 2018-2020 | Base, Essence, Preferred | 4 Cyl 2.0 L GAS
View related parts
Buick Shifter Assembly Part Number: 39224646
$152.93 MSRP: $242.80
You Save: $89.87 (38%)
ADD TO CART
Product Specifications
- Other Name: Control Assembly-Automatic Transmission; Shift Lever; Gear Shift Assembly; Control, Transmission Shift
- Replaces: 39171639, 13487292
Fits the following Buick Models:
- Regal Sportback | 2018-2020 | Avenir, Base, Essence, GS, Preferred, Preferred II | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
- Regal TourX | 2018-2020 | Base, Essence, Preferred | 4 Cyl 2.0 L GAS
View related parts
Buick Shifter Assembly Part Number: 84698213
$147.06 MSRP: $242.19
You Save: $95.13 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Control Assembly-Automatic Transmission; Shift Lever; Gear Shift Assembly; Control, Transmission Shift
- Replaces: 23287256
Fits the following Buick Models:
- Envision | 2016-2020 | Base, Essence, Preferred, Premium, Premium II | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS
View related parts
Buick Lever Part Number: 84835020
$8.23 MSRP: $12.90
You Save: $4.67 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Assembly-Automatic Transmission Range Selector Lever Cable; Lever, Transmission Control
- Replaces: 84399611, 84589460
Fits the following Buick Models:
- Encore GX | 2024 | Avenir, Preferred, Sport Touring | 3 Cyl 1.2 L GAS, 3 Cyl 1.3 L GAS
View related parts
Buick Shifter Assembly Part Number: 39224645
$159.60 MSRP: $251.12
You Save: $91.52 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Control Assembly-Automatic Transmission; Shift Lever; Gear Shift Assembly; Control, Transmission Shift
- Replaces: 13487291, 39171638
Fits the following Buick Models:
- Regal Sportback | 2018-2020 | Avenir, Base, Essence, GS, Preferred, Preferred II | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
- Regal TourX | 2018-2020 | Base, Essence, Preferred | 4 Cyl 2.0 L GAS
View related parts
Buick Gear Shift Assembly, Black Part Number: 42506455
$153.11 MSRP: $294.57
You Save: $141.46 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Control, Transmission Shift; Automatic Transmission Selector Handle; Shift Lever; Shifter
- Replaces: 95133897, 42498079, 94507286, 42452142, 94529291, 95371592
Fits the following Buick Models:
- Encore | 2013-2016 | Base, Convenience, Leather, Premium, Sport Touring | 4 Cyl 1.4 L GAS
View related parts
Buick Gear Shift Assembly Part Number: 13534683
$64.12 MSRP: $100.35
You Save: $36.23 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Control Assembly, Automatic Transmission; Automatic Transmission Selector Handle; Shift Lever; Shifter; Control, Transmission Shift
- Replaces: 13587896, 13579727, 13595921
Fits the following Buick Models:
- LaCrosse | 2014-2016 | Base, Leather, Premium, Sport Touring | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Buick Shifter Assembly Part Number: 13545105
$67.71 MSRP: $102.15
You Save: $34.44 (34%)
ADD TO CART
Product Specifications
- Other Name: Control Assembly-Automatic Transmission (W/O Base); Gear Shift Assembly; Control, Transmission Shift
Fits the following Buick Models:
- Encore GX | 2022-2024 | Avenir, Essence, Preferred, Select, Sport Touring | 3 Cyl 1.2 L GAS, 3 Cyl 1.3 L GAS
View related parts
Buick Shifter Assembly Part Number: 15235213
Product Specifications
- Other Name: Control, Transmission Shift; Shift Lever; Gear Shift Assembly; Shifter; Control, Transmission Shift Control Lever; Control, Transmission Shift Control
- Replaces: 15114505, 15126159, 15203599, 15179543, 15000213
Fits the following Buick Models:
- Rainier | 2004-2005 | CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
Buick Gear Shift Assembly Part Number: 42506458
$188.01 MSRP: $281.04
You Save: $93.03 (34%)
Product Specifications
- Other Name: Control Assembly-Automatic Transmission *Cocoa; Shift Lever; Shifter; Control, Transmission Shift
- Replaces: 42452145, 94507289, 95371595, 95133900
Fits the following Buick Models:
- Encore | 2013-2016 | Base, Convenience, Leather, Premium, Sport Touring | 4 Cyl 1.4 L GAS
View related parts
Buick Shift Knob Part Number: 15287603
$17.15 MSRP: $25.51
You Save: $8.36 (33%)
Product Specifications
- Other Name: Handle, Transmission Control Lever; Automatic Transmission Selector Handle
Fits the following Buick Models:
- Lucerne | 2006-2011 | CX, CXL, CXL Special Edition, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
Buick Shift Actuator Part Number: 15884352
$217.43 MSRP: $325.00
You Save: $107.57 (34%)
Product Specifications
- Other Name: Control, Transmission Shift; Control Assembly; Lock Assembly; Controller; Control, Transmission Shift Control Lever
- Replaces: 26051958
Fits the following Buick Models:
- Century | 1997-2004 | Custom, Limited | 6 Cyl 3.1 L GAS
- LaCrosse | 2005-2006 | CX, CXL, CXS | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
- LeSabre | 2000-2005 | Custom, Limited | 6 Cyl 3.8 L GAS
- Lucerne | 2006-2010 | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
- Park Avenue | 1997-2004 | Base, Ultra | 6 Cyl 3.8 L GAS
- Regal | 1997-1998 | 25th Anniversary Edition, GS, LS | 6 Cyl 3.8 L GAS
View More
View related parts
Buick Shift Knob Part Number: 15243436
Product Specifications
- Other Name: Handle Assembly-Automatic Transmission Control Lever *Cashmere E; Automatic Transmission Selector Handle; Handle, Transmission Control Lever
Fits the following Buick Models:
- Lucerne | 2006 | CXS | 8 Cyl 4.6 L GAS
View related parts
Buick Gear Shift Assembly Part Number: 26044627
Product Specifications
- Other Name: Handle Assembly; Automatic Transmission Selector Handle; Control, Transmission Shift Control Lever; Control, Transmission Shift
Fits the following Buick Models:
- Riviera | 1995-1997 | Base | 6 Cyl 3.8 L GAS
View related parts
Buick Shift Knob, Black Part Number: 22552752
Product Specifications
- Other Name: Handle Assembly-Automatic Transmission Control Lever *Black; Handle, Transmission Gear Shift Control; Handle, Transmission Control Lever
Fits the following Buick Models:
- Skylark | 1992-1995 | Custom, Limited | 4 Cyl 2.3 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS
View related parts
Buick Shift Lever Part Number: 10208408
Product Specifications
- Other Name: Lever, Transmission Control Lever
Fits the following Buick Models:
- Commercial Chassis | 1991-1996 | Base | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- Roadmaster | 1991-1996 | Base, Collector's Edition, Estate Wagon, Estate Wagon Collector's Edition, Limited, Limited Collector's Edition | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Buick Shift Lever Part Number: 25616932
Product Specifications
- Other Name: Lever, Transmission Control Lever
Fits the following Buick Models:
- LeSabre | 1994-1999 | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick Shift Lever Part Number: 15789104
Product Specifications
- Other Name: Lever, Transmission Control Lever; Automatic Transmission Selector Handle; Gear Shift Assembly
Fits the following Buick Models:
- Lucerne | 2006-2011 | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
Buick Shift Knob, Blue Part Number: 10379724
Product Specifications
- Other Name: Handle Assembly-Automatic Transmission Control Lever *Blue; Automatic Transmission Selector Handle; Handle, Transmission Control Lever
Fits the following Buick Models:
- Lucerne | 2006 | CX, CXL | 6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS
View related parts
Buick Shift Knob, Black Part Number: 10379993
Product Specifications
- Other Name: Handle Assembly-Automatic Transmission Control Lever *Ebony; Automatic Transmission Selector Handle; Handle, Transmission Control Lever
Fits the following Buick Models:
- Lucerne | 2006-2007 | CXS | 8 Cyl 4.6 L GAS

| Page 1 of 4 |Next >

1-20 of 63 Results

Buick Automatic Transmission Shifter

Choose OEM Automatic Transmission Shifter, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Buick's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Buick Automatic Transmission Shifter. You can shop at highly competitive prices and protect your budget. All our genuine Buick parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Buick Automatic Transmission Shifter allows drivers to shift their park, reverse, neutral and drive without thinking. Buick has been more than a hundred years perfecting ride comfort, quiet tuning and subtle style on the daily roads. The badge became credible by combining vintage durability and new technology such as two-zone climate control and the convenient cabin controls. The Wildcat EV concept of 2022 marked the first steps of the brand taking an electric cruise and not abandoning the soothing cabin atmosphere. Drivers like the fact that all Buick models reduce noise and make steering light; long commutes are no longer exhausting. Such a combination of traditional and contemporary touches makes shoppers feel safe without having the lineup too old-fashioned to be applied by new generations. Within each of the existing models, the Automatic Transmission Shifter is mounted on the console or column and has shift-by-wire electronics to allow a soft nudge to switch to park, reverse, neutral or drive with the system holding undesired gears and aligning with safety interlocks. The Automatic Transmission Shifter is compatible with the entire lineup, including sedans and SUVs, providing all drivers with a common easy route to fast starts, stable cruising and assured parking, and the basic design puts the focus on the road rather than the need to adjust the lever.

Buick Automatic Transmission Shifter Parts and Q&A

Shift Actuator
15884352
Q: How to replace the Automatic Transmission Shifter lever on Buick LaCrosse?
A:
Starting the repair of an automatic transmission shift lever requires disabling the restraints system. The shift lever seal needs to slide upwards along the shift lever before the removal of steering column trim covers becomes necessary. The customer should disconnect the shift lever connector which sits beneath the column base while using tools to uninstall the shift lever screw from the shift lever assembly component. Extraction of the shift lever and its seal from the linear shift assembly needs proper sliding of the shift lever seal towards the narrow section of the shift lever. The narrow end of the shift lever assembly should have the shift lever seal installed before attaching the assembly to the linear shift assembly. Fasten the shift lever screw to the shift lever assembly by tightening it to 20 nm (15 ft. Lbs.). Push the shift lever seal downwards along the shift lever assembly until it properly fits into the steering column trim covers. Enable the restraint system only after reattaching the steering column trim covers when necessary.
Gear Shift Assembly
10328920
Q: How to replace the Automatic Transmission Shifter on Buick Regal?
A:
When replacing an a/t shift lever you must begin by taking out steering column trim covers while rolling back the shift lever boot. The first step involves removing the shift lever screw before proceeding to extract the shift lever assembly followed by removal of the shift lever seal from this assembly. Start your installation steps by setting the shift lever seal onto the shift lever assembly followed by securing it with the shift lever screw tightened to 1.5 nm (13 lb in). The installation process requires proper seating of the shift lever boot inside the trim covers before reinstalling the steering column trim covers.