How to replace the Automatic Transmission Shift Levers for the range selector cable in the automatic transaxle (A/T) on Buick Regal?

The replacement process of Automatic Transmission Shift Levers starts by removing the throttle body air inlet duct. The first step requires removing the a/t range selector lever nut before detaching the automatic transmission shift lever cable from the a/t range selector lever. The installation begins when reversing these steps starting with reattaching the a/t range selector lever cable to the a/t range selector lever. Reinstall the automatic transmission (A/T) range selector lever to its designated position while closely following the fastener notice in service precaution requirements. Fasten the a/t range selector lever nut tightly to 20 nm (15 ft. Lbs.) torque value then connect the a/t range selector lever cable to the a/t range selector lever. Operation of the a/t range selector lever cable must be adjusted before reattaching the throttle body air inlet duct.

How to Properly Replace Automatic Transmission Shift Levers on Buick LaCrosse?

The sir system needs to be disabled before replacing a shift lever. .attach the shift lever seal to the shift lever ascending upward and then take off any steering column trim covers that are present. You need to disconnect the shift lever connector at the base of the column before you can take out the shift lever screw from the shift lever assembly. The linear shift assembly demands that the shift lever seal must slide toward the narrow section of the shift lever when being extracted from the assembly unit. Install the shift lever seal by extending it onto the narrow section of the shift lever assembly before joining the shift lever assembly to the linear shift assembly. Set the shift lever screw into the shift lever assembly before tightening it to 20 n.m (15 lb ft). Insert the shift lever seal into the shift lever assembly by moving it along the assembly toward the steering column trim covers. The process finishes with enabling the sir system after reinstalling steering column trim covers when required.

OEM Buick Automatic Transmission Shift Levers

Automatic Transmission Shifter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

43 Automatic Transmission Shift Levers found

View related parts
Buick Gear Shift Assembly, Black Part Number: 42506455
$153.11 MSRP: $294.57
You Save: $141.46 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Control, Transmission Shift; Automatic Transmission Selector Handle; Shift Lever; Shifter
- Replaces: 95133897, 42498079, 94507286, 42452142, 94529291, 95371592
Fits the following Buick Models:
- Encore | 2013-2016 | Base, Convenience, Leather, Premium, Sport Touring | 4 Cyl 1.4 L GAS
View related parts
Buick Gear Shift Assembly Part Number: 13534683
$64.12 MSRP: $100.35
You Save: $36.23 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Control Assembly, Automatic Transmission; Automatic Transmission Selector Handle; Shift Lever; Shifter; Control, Transmission Shift
- Replaces: 13587896, 13579727, 13595921
Fits the following Buick Models:
- LaCrosse | 2014-2016 | Base, Leather, Premium, Sport Touring | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Buick Shifter Assembly Part Number: 13534324
$68.38 MSRP: $101.77
You Save: $33.39 (33%)
ADD TO CART
Product Specifications
- Other Name: Control Assembly-Automatic Transmission (W/O Base); Automatic Transmission Selector Handle; Shift Lever; Gear Shift Assembly; Control, Transmission Shift
- Replaced by: 13545091
Fits the following Buick Models:
- Encore GX | 2020-2021 | Essence, Preferred, Select | 3 Cyl 1.2 L GAS, 3 Cyl 1.3 L GAS
View related parts
Buick Shifter Assembly Part Number: 13545105
$67.71 MSRP: $102.15
You Save: $34.44 (34%)
ADD TO CART
Product Specifications
- Other Name: Control Assembly-Automatic Transmission (W/O Base); Gear Shift Assembly; Control, Transmission Shift
Fits the following Buick Models:
- Encore GX | 2022-2024 | Avenir, Essence, Preferred, Select, Sport Touring | 3 Cyl 1.2 L GAS, 3 Cyl 1.3 L GAS
View related parts
Buick Shifter Assembly Part Number: 60003332
$75.94 MSRP: $113.02
You Save: $37.08 (33%)
ADD TO CART
Product Specifications
- Other Name: Control Assembly-Automatic Transmission; Automatic Transmission Selector Handle; Shift Lever; Gear Shift Assembly; Controller
- Replaced by: 60006916
Fits the following Buick Models:
- Encore GX | 2020-2023 | Essence, Preferred, Select | 3 Cyl 1.2 L GAS, 3 Cyl 1.3 L GAS
View related parts
Buick Shifter Assembly Part Number: 15235213
Product Specifications
- Other Name: Control, Transmission Shift; Shift Lever; Gear Shift Assembly; Shifter; Control, Transmission Shift Control Lever; Control, Transmission Shift Control
- Replaces: 15114505, 15126159, 15203599, 15179543, 15000213
Fits the following Buick Models:
- Rainier | 2004-2005 | CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
Buick Gear Shift Assembly Part Number: 42506458
$188.01 MSRP: $281.04
You Save: $93.03 (34%)
Product Specifications
- Other Name: Control Assembly-Automatic Transmission *Cocoa; Shift Lever; Shifter; Control, Transmission Shift
- Replaces: 42452145, 94507289, 95371595, 95133900
Fits the following Buick Models:
- Encore | 2013-2016 | Base, Convenience, Leather, Premium, Sport Touring | 4 Cyl 1.4 L GAS
View related parts
Buick Gear Shift Assembly Part Number: 26044627
Product Specifications
- Other Name: Handle Assembly; Automatic Transmission Selector Handle; Control, Transmission Shift Control Lever; Control, Transmission Shift
Fits the following Buick Models:
- Riviera | 1995-1997 | Base | 6 Cyl 3.8 L GAS
View related parts
Buick Shift Lever Part Number: 10208408
Product Specifications
- Other Name: Lever, Transmission Control Lever
Fits the following Buick Models:
- Commercial Chassis | 1991-1996 | Base | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- Roadmaster | 1991-1996 | Base, Collector's Edition, Estate Wagon, Estate Wagon Collector's Edition, Limited, Limited Collector's Edition | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Buick Shift Lever Part Number: 25616932
Product Specifications
- Other Name: Lever, Transmission Control Lever
Fits the following Buick Models:
- LeSabre | 1994-1999 | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick Shift Lever Part Number: 15789104
Product Specifications
- Other Name: Lever, Transmission Control Lever; Automatic Transmission Selector Handle; Gear Shift Assembly
Fits the following Buick Models:
- Lucerne | 2006-2011 | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
Buick Shift Lever Part Number: 26101680
Product Specifications
- Other Name: Lever Assembly, Automatic Transmission Control; Automatic Transmission Selector Handle; Gear Shift Assembly; Lever, Transmission Control Lever
- Replaces: 10258091, 26056013
Fits the following Buick Models:
- Century | 1997-2005 | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
- LeSabre | 2000-2005 | Custom, Limited | 6 Cyl 3.8 L GAS
- Park Avenue | 1997-2005 | Base, Ultra | 6 Cyl 3.8 L GAS
- Regal | 1997-2001 | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View More
View related parts
Buick Shift Actuator Part Number: 19149520
Product Specifications
- Other Name: Control Assembly, Automatic Transmission; Control, Transmission Shift Control Lever; Control, Transmission Shift
Fits the following Buick Models:
- LaCrosse | 2007-2009 | CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
Buick Shift Lever Part Number: 26101657
Product Specifications
- Other Name: Lever Assembly, Automatic Transmission Control; Automatic Transmission Selector Handle; Gear Shift Assembly; Switch; Lever, Transmission Control Lever
- Replaces: 26056014
Fits the following Buick Models:
- LeSabre | 2000-2005 | Custom, Limited | 6 Cyl 3.8 L GAS
- Park Avenue | 1997-2005 | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Shift Lever Part Number: 25558866
Product Specifications
- Other Name: Lever, Transmission Control Lever
Fits the following Buick Models:
- LeSabre | 1992-1993 | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick Shift Lever Part Number: 22637610
Product Specifications
- Other Name: Control Assembly-Automatic Transmission; Shifter; Control, Transmission Shift Lever
Fits the following Buick Models:
- Skylark | 1992-1995 | Custom, Gran Sport, Limited | 4 Cyl 2.3 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS
View related parts
Buick Adapter Part Number: 26042658
Product Specifications
- Other Name: Control Assembly, Automatic Transmission; Control, Transmission Shift Control Lever; Control, Transmission Shift
Fits the following Buick Models:
- Skylark | 1996-1998 | Custom, Gran Sport, Limited, Olympic Gold Edition | 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
View related parts
Buick Gear Shift Assembly Part Number: 22966996
$150.57 MSRP: $225.07
You Save: $74.50 (34%)
Product Specifications
- Other Name: Control Assembly-Automatic Transmission; Shifter; Control, Transmission Shift Control
- Replaces: 13306867, 20934130, 20965276
Fits the following Buick Models:
- Regal | 2011-2013 | Base, CXL, GS, Premium | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L FLEX, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Shifter Assembly Part Number: 23392163
Product Specifications
- Other Name: Control Assembly-Automatic Transmission; Automatic Transmission Selector Handle; Shift Lever; Gear Shift Assembly; Bracket, Control Lever; Base, Transmission Shift
- Replaces: 20981588, 25778920
Fits the following Buick Models:
- Enclave | 2008-2017 | Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS
View related parts
Buick Gear Shift Assembly Part Number: 12552375
Product Specifications
- Other Name: Control Assembly-Automatic Transmission; Automatic Transmission Selector Handle; Control, Transmission Shift Control Lever; Control, Transmission Shift Control; Control, Transmission Shift
Fits the following Buick Models:
- Regal | 1995-1996 | Custom, Gran Sport, Limited, Olympic Gold Edition | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS

| Page 1 of 3 |Next >

1-20 of 43 Results

Buick Automatic Transmission Shift Levers

Choose OEM Automatic Transmission Shift Levers, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Buick's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Buick Automatic Transmission Shift Levers. You can shop at highly competitive prices and protect your budget. All our genuine Buick parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Buick Automatic Transmission Shift Levers provide a driver with rapid and safe gear selecting that does not distract on the road. In 1903, Buick started selling cars and soon earned a reputation of consistent comforts and silence in the cabins. The initial touring models demonstrated that good ride quality need not be accompanied by high prices, but resulted in devoted families nationwide. The company continued with QuietTuning, thicker glass and isolated subframes many decades later and these formulations silence wind and vibration when traveling along the highway. The Wildcat EV eye-catching concept demonstrates the direction of all-electric propulsion without discarding the flowing lines that drivers know about. Buick does not have to sacrifice heritage to gain access to new technology and allow shoppers to receive high-end appearances without paying the high premiums of ultra-luxury. The catalog of this company remains centered on affordable comfort, flowing power, and design indicators which do not rely on temporary trends. The Automatic Transmission Shift Levers that have been applied in various generations are based on robust PRNDL designs, electronic shift interlocks, and current shift-by-wire systems which convert the small motions with the wrist into accurate hydraulic or electronic signals to move the gearbox between park and overdrive and to ensure that parts of the driveline and those in the car are not harmed by the sudden engagement of the gears during emergency stops or steep ascents. Automatic Transmission Shift Levers also facilitate and ease efficiency as they synchronize with engine controls, thus the drive train creates seamless launches, avoidable fuel combustion in traffic, and consistent throttle response; the mere lever is a performance, safety, and overall longevity protector.

Buick Automatic Transmission Shift Levers Parts and Q&A

Shift Lever
26101680
Q: How to replace the Automatic Transmission Shift Levers for the range selector cable in the automatic transaxle (A/T) on Buick Regal?
A:
The replacement process of Automatic Transmission Shift Levers starts by removing the throttle body air inlet duct. The first step requires removing the a/t range selector lever nut before detaching the automatic transmission shift lever cable from the a/t range selector lever. The installation begins when reversing these steps starting with reattaching the a/t range selector lever cable to the a/t range selector lever. Reinstall the automatic transmission (A/T) range selector lever to its designated position while closely following the fastener notice in service precaution requirements. Fasten the a/t range selector lever nut tightly to 20 nm (15 ft. Lbs.) torque value then connect the a/t range selector lever cable to the a/t range selector lever. Operation of the a/t range selector lever cable must be adjusted before reattaching the throttle body air inlet duct.
Shifter Assembly
25778992
Q: How to Properly Replace Automatic Transmission Shift Levers on Buick LaCrosse?
A:
The sir system needs to be disabled before replacing a shift lever. .attach the shift lever seal to the shift lever ascending upward and then take off any steering column trim covers that are present. You need to disconnect the shift lever connector at the base of the column before you can take out the shift lever screw from the shift lever assembly. The linear shift assembly demands that the shift lever seal must slide toward the narrow section of the shift lever when being extracted from the assembly unit. Install the shift lever seal by extending it onto the narrow section of the shift lever assembly before joining the shift lever assembly to the linear shift assembly. Set the shift lever screw into the shift lever assembly before tightening it to 20 n.m (15 lb ft). Insert the shift lever seal into the shift lever assembly by moving it along the assembly toward the steering column trim covers. The process finishes with enabling the sir system after reinstalling steering column trim covers when required.