How to remove and replace the Brake Line and its reservoir hose on 2010 Chevrolet Silverado 1500?

Begin by turning off the ignition and disconnecting the key because it takes between 1-3 minutes for the brake modulator and hpa to relieve pressure through the brake pedal application process. Wait for the pressure relief to finish before emptying the brake fluid from the master cylinder reservoir through the reservoir supply hose fitting and disposing of the brake fluid into an approved waste container. Disconnect these three components from the Brake Master Cylinder reservoir return hose quick connect and supply hose quick connect and Brake Fluid Level Sensor electrical connector. Lift and stabilize the vehicle while taking out the left front wheelhouse liner. The abs module splash shield retainer is the first item to remove before you proceed to the abs module splash shield bolts and finally the splash shield. The bpmv assembly and hose fittings need cleaning before removing the bpmv supply hose quick connect and applying caps to the inlet port with plugging of the supply hose to prevent brake fluid loss. After disconnecting the bpmv return hose quick connect you should cap the outlet port while plugging in the return hose. Remove the supply and return hoses from their supportive hardware and remove them from the vehicle framework. Proceed with attachment by connecting vehicle supply and return hoses to their retainers while ensuring bpmv return hose quick connect maintains full engagement with supply hose quick connect . After mounting the abs module splash shield add the bolts and tighten them to 20 nm (15 lb ft) then secure the splash shield retainer. Reinstall the left front wheelhouse liner then lower the vehicle while connecting the Brake Master Cylinder reservoir return hose quick connect and supply hose quick connect . Special attention should be given to refill the Brake Master Cylinder reservoir.

OEM 2010 Chevrolet Silverado 1500 Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Brake Lines found

View related parts
2010 Chevrolet Silverado 1500 Flex Hose, Front Passenger Side Part Number: 84331228
$21.63 MSRP: $40.61
You Save: $18.98 (47%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Replaces: 15875928, 84183672, 15923784, 22829661, 23245429, 22946996, 25890939
- Item Weight: 1.10 Pounds
- Item Dimensions: 22.2 x 3.0 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84331228
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Silverado 1500 Submodels:
- Custom, Custom Trail Boss, High Country, Hybrid, LS, LT, LT Trail Boss, LTZ, RST, SSV, WT, XFE | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2010 Chevrolet Silverado 1500 Brake Line Part Number: 88983905
$68.67 MSRP: $134.44
You Save: $65.77 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe, Brake; Hydraulic Hose; Brake Hose; Pipe, Hydraulic Brake Pipe; Pipe, Hydraulic Brake
- Replaces: 25837622, 25837624, 84330459, 22726507, 84380488, 84330461
- Item Weight: 1.10 Pounds
- Item Dimensions: 22.5 x 5.2 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88983905
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 5.3 L FLEX, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.2 L FLEX
View related parts
2010 Chevrolet Silverado 1500 Flex Hose, Front Driver Side Part Number: 84331227
$21.20 MSRP: $39.81
You Save: $18.61 (47%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Replaces: 15923783, 22946995, 22829660, 23245428, 25890938, 15875927, 84183671
- Item Weight: 1.10 Pounds
- Item Dimensions: 21.7 x 3.0 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84331227
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Silverado 1500 Submodels:
- Custom, Custom Trail Boss, High Country, Hybrid, LS, LT, LT Trail Boss, LTZ, RST, SSV, WT, XFE | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2010 Chevrolet Silverado 1500 Flex Hose Part Number: 25923721
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear
- Item Weight: 1.30 Pounds
- Item Dimensions: 6.1 x 3.1 x 25.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25923721
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2010 Chevrolet Silverado 1500 Flex Hose Part Number: 25923724
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear
- Replaces: 15914428
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.2 x 24.7 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25923724
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2010 Chevrolet Silverado 1500 Flex Hose, Driver Side Part Number: 25923717
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Replaces: 15914432
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.1 x 2.1 x 19.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25923717
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2010 Chevrolet Silverado 1500 Flex Hose, Passenger Side Part Number: 25923716
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Replaces: 15914431
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.1 x 2.1 x 19.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25923716
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX

2010 Chevrolet Silverado 1500 Brake Line

With a comprehensive array of OEM 2010 Chevrolet Silverado 1500 Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Silverado 1500 Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Silverado 1500 Brake Line Parts and Q&A

Q: How to remove and replace the Brake Line and its reservoir hose on 2010 Chevrolet Silverado 1500?
A: Begin by turning off the ignition and disconnecting the key because it takes between 1-3 minutes for the brake modulator and hpa to relieve pressure through the brake pedal application process. Wait for the pressure relief to finish before emptying the brake fluid from the master cylinder reservoir through the reservoir supply hose fitting and disposing of the brake fluid into an approved waste container. Disconnect these three components from the Brake Master Cylinder reservoir return hose quick connect and supply hose quick connect and Brake Fluid Level Sensor electrical connector. Lift and stabilize the vehicle while taking out the left front wheelhouse liner. The abs module splash shield retainer is the first item to remove before you proceed to the abs module splash shield bolts and finally the splash shield. The bpmv assembly and hose fittings need cleaning before removing the bpmv supply hose quick connect and applying caps to the inlet port with plugging of the supply hose to prevent brake fluid loss. After disconnecting the bpmv return hose quick connect you should cap the outlet port while plugging in the return hose. Remove the supply and return hoses from their supportive hardware and remove them from the vehicle framework. Proceed with attachment by connecting vehicle supply and return hoses to their retainers while ensuring bpmv return hose quick connect maintains full engagement with supply hose quick connect . After mounting the abs module splash shield add the bolts and tighten them to 20 nm (15 lb ft) then secure the splash shield retainer. Reinstall the left front wheelhouse liner then lower the vehicle while connecting the Brake Master Cylinder reservoir return hose quick connect and supply hose quick connect . Special attention should be given to refill the Brake Master Cylinder reservoir.