How to replace the knock sensor on Bank 2 on 2010 Chevrolet Corvette?

The procedure for Knock Sensor replacement on bank 2 requires starting from correct removal of the right Exhaust Manifold and right Catalytic Converter. Better access can be achieved by taking out the Starter assembly if needed. Separate the Knock Sensor mounting followed by disconnecting the engine electrical connector from the Knock Sensor before sensor removal. Install the Knock Sensor by following this procedure: reconnect the electrical connector to the Knock Sensor and place the sensor on the engine block then install the mounting bolt and tighten it to 25 nm (18 lb ft). Reinstallation of the Starter assembly must be performed immediately before installing the right Catalytic Converter and right Exhaust Manifold. Reconnect the negative Battery Cable when the procedure is complete.

OEM 2010 Chevrolet Corvette Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2010 Chevrolet Corvette Knock Sensor Part Number: 12623730
$13.47 MSRP: $25.30
You Save: $11.83 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Ignition Knock (Detonation) Sensor
- Replaces: 12570125
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.7 x 2.5 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12623730
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS

2010 Chevrolet Corvette Knock Sensor

With a comprehensive array of OEM 2010 Chevrolet Corvette Knock Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Corvette Knock Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Corvette Knock Sensor Parts and Q&A

Q: How to replace the knock sensor on Bank 2 on 2010 Chevrolet Corvette?
A: The procedure for Knock Sensor replacement on bank 2 requires starting from correct removal of the right Exhaust Manifold and right Catalytic Converter. Better access can be achieved by taking out the Starter assembly if needed. Separate the Knock Sensor mounting followed by disconnecting the engine electrical connector from the Knock Sensor before sensor removal. Install the Knock Sensor by following this procedure: reconnect the electrical connector to the Knock Sensor and place the sensor on the engine block then install the mounting bolt and tighten it to 25 nm (18 lb ft). Reinstallation of the Starter assembly must be performed immediately before installing the right Catalytic Converter and right Exhaust Manifold. Reconnect the negative Battery Cable when the procedure is complete.