How to replace the Engine Coolant Temperature Sensor on 2010 Chevrolet Corvette?

First turn OFF the ignition while maintaining solid jack stand support underneath the vehicle opposite the removal area before beginning to replace the Engine Coolant Temperature Sensor because unsupported major components present serious risk of injury or death. Lift the vehicle using a jack and draw out coolant until the ECT sensor stays submerged. Separate the ECT sensor's harness connector while lowering the vehicle until you can safely remove it from the sensor while being careful not to damage parts essential for fuel control. Use thread sealer P/N 12346004 (Canadian P/N 10953480) or an alternative to coat the ECT sensor's threads before sensor installation. Fasten the ECT sensor by turning it to 20 Nm (15 lb ft). Reconnect the ECT sensor's electrical connection points then fill the engine coolant system with fluid.

OEM 2010 Chevrolet Corvette Coolant Temperature Sensor

Coolant Water Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Temperature Sensor found

View related parts
2010 Chevrolet Corvette Coolant Temperature Sensor, Black Part Number: 12608814
$30.66 MSRP: $57.58
You Save: $26.92 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Engine Coolant Temperature *Ite Or Black; Engine Coolant Temperature Sensor; Temperature Sensor; Temperature Sending Unit; Coolant Temperature Sensor; Engine Oil Pressure/Temperature Sensor; Computer Control Sensors
- Replaces: 15369305, 25037062, 12191170, 15326388
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.8 x 1.6 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12608814
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Grand Sport, Indianapolis 500 Pace Car, Stingray, Z06, Z06 Carbon, ZR1 | 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS

2010 Chevrolet Corvette Coolant Temperature Sensor

With a comprehensive array of OEM 2010 Chevrolet Corvette Coolant Temperature Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Corvette Coolant Temperature Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Corvette Coolant Temperature Sensor Parts and Q&A

Q: How to replace the Engine Coolant Temperature Sensor on 2010 Chevrolet Corvette?
A: First turn OFF the ignition while maintaining solid jack stand support underneath the vehicle opposite the removal area before beginning to replace the Engine Coolant Temperature Sensor because unsupported major components present serious risk of injury or death. Lift the vehicle using a jack and draw out coolant until the ECT sensor stays submerged. Separate the ECT sensor's harness connector while lowering the vehicle until you can safely remove it from the sensor while being careful not to damage parts essential for fuel control. Use thread sealer P/N 12346004 (Canadian P/N 10953480) or an alternative to coat the ECT sensor's threads before sensor installation. Fasten the ECT sensor by turning it to 20 Nm (15 lb ft). Reconnect the ECT sensor's electrical connection points then fill the engine coolant system with fluid.