ChevyParts
My Garage
My Account
Cart
OEM 2010 Chevrolet Corvette CV Boot
Axle Boot- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 CV Boots found
2010 Chevrolet Corvette Outer Boot, Rear Part Number: 19153125
$66.04 MSRP: $103.44You Save: $37.40 (37%)Product Specifications- Other Name: Boot Kit, Rear Axle Universal Joint; CV Boot
- Position: Rear
- Item Weight: 3.20 Pounds
- Item Dimensions: 9.1 x 8.6 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19153125
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2010 Chevrolet Corvette Inner Boot, Rear Part Number: 19153124
Product Specifications- Other Name: Boot Kit, Rear Axle Universal Joint; CV Boot
- Position: Rear
- Item Weight: 3.10 Pounds
- Item Dimensions: 7.1 x 5.4 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19153124
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Boot Kit, Rear Axle Universal Joint; CV Boot
- Position: Rear Driver Side
- Item Weight: 1.30 Pounds
- Item Dimensions: 8.5 x 8.6 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19181706
- Warranty: This genuine part is guaranteed by GM's factory warranty.
- Product Specifications
- Other Name: Boot Kit, Rear Axle Universal Joint; CV Boot
- Position: Rear Driver Side
- Item Weight: 0.80 Pounds
- Item Dimensions: 8.4 x 8.6 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19181705
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2010 Chevrolet Corvette Inner Boot Part Number: 89047795
Product Specifications- Other Name: Boot Kit, Rear Axle Universal Joint; CV Boot
- Position: Rear Inner
- Item Weight: 1.10 Pounds
- Item Dimensions: 8.7 x 5.1 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 89047795
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2010 Chevrolet Corvette Outer Boot Part Number: 88955486
Product Specifications- Other Name: Boot Kit, Rear Axle Universal Joint; CV Boot
- Position: Rear Outer
- Item Weight: 3.30 Pounds
- Item Dimensions: 7.4 x 5.3 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 88955486
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2010 Chevrolet Corvette CV Boot
With a comprehensive array of OEM 2010 Chevrolet Corvette CV Boot, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Corvette CV Boot are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2010 Chevrolet Corvette CV Boot Parts and Q&A
- Q: How to replace the outer CV boot of the wheel drive shaft on 2010 Chevrolet Corvette?A: Cut all connections and drape automobile-like over screws laying on or use arng5 wire chair to implement and turn. Display to fragment where screws should connect and disconnect, connecting then screwing lessening how often screw stealing and disassemble each to this screw of the automation stops. Stick tongues of at least where. Remove and discard the outer boot clamp from the CV Joint and the boot, as well as the inner boot clamp from the boot and the wheel drive shaft using a flat-bladed tool, then using side cutters to remove and discard the inner boot clamp from the boot and the wheel drive shaft, make sure to use the new clamps during a reinstallation. Then, use a wooden block and a hammer to disconnect the CV Joint from the wheel drive shaft and pull out the boot from the wheel drive shaft. Check outer CV Joint for damage and wear. For installation, install the boot and inner and outer clamps on the wheel drive shaft , such that, boot is well seated in groove of the wheel drive shaft. Employing the j 35910 - drive axle boot clamp pliers, clip the boot clamp until its width gap will be 2.15 mm (0.085 in). After that place half of the lubricant in the outer boot and the rest in the CV Joint, and reinstall the CV Joint onto the wheel drive shaft on a block of wood hit it with a hammer but the boot clamp must be tightly closed and seated accordingly. Close the boot clamp with the help of the ch 48894- wheel drive shaft boot clamp pliers, take the wheel drive shaft from the bench vise, and drive the CV Joint around in a circular movement 4 to 5 times to allow the lubricant to spread. Lastly, you should wipe off any residual lubricant from the wheel drive shaft assembly and install the wheel drive shaft assembly.
Related 2010 Chevrolet Corvette Parts
2010 Chevrolet Corvette Axle Shaft
2010 Chevrolet Corvette Control Arm
2010 Chevrolet Corvette Control Arm Bolt
2010 Chevrolet Corvette Control Arm Bracket
2010 Chevrolet Corvette Lateral Link
2010 Chevrolet Corvette Ride Height Sensor
2010 Chevrolet Corvette Sway Bar Bracket
2010 Chevrolet Corvette Sway Bar Bushing
2010 Chevrolet Corvette Sway Bar Kit
2010 Chevrolet Corvette Sway Bar Link
2010 Chevrolet Corvette Trailing Arm
2010 Chevrolet Corvette Wheel Cover