How to replace the upper control arm ball joint on both 4WD and 2WD on 2010 Chevrolet Colorado?

You need to lift your car securely when working on the upper Control Arm Ball Joint for both 4wd and 2wd models. Support the vehicle by placing a jack stand under the lower Control Arm assembly when you take off its tire and wheel. Detach the front brake hose from the Control Arm while removing the wheel speed sensor bracket bolt and bracket connections. To remove the upper Control Arm from the ball stud remove all retention nuts and discard them before taking out the nut from the upper Ball Joint. Place the j-42188-b Ball Joint separator across the Ball Joint and Steering Knuckle to disengage them and take out the Ball Joint. Secure the new Ball Joint to the Steering Knuckle according to fastener guidelines when putting it in place. Apply a new upper Ball Joint nut and tighten it to 75 nm (55 lb ft) torque. Put retention nuts through the upper Control Arm and ball stud before tightening them to 47 nm (35 lb ft). Reinstall the two wheel speed sensor brackets then fasten their bolt to 20 nm (15 lb ft). Hook the front brake hose to the upper Control Arm then place the tire and wheel assembly back before taking out the lower Control Arm stand and putting the vehicle down. Finally, verify the wheel alignment.

OEM 2010 Chevrolet Colorado Ball Joint

Control Arm Joint

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Ball Joints found

View related parts
2010 Chevrolet Colorado Upper Ball Joint Part Number: 89040241
$96.70 MSRP: $153.53
You Save: $56.83 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint Kit, Front Upper Control Arm Ball; Suspension Ball Joint; Ball Joint; Upper Ball Joints; Joint Kit, Steering Knuckle Upper Control Arm
- Position: Front Upper
- Item Weight: 2.30 Pounds
- Item Dimensions: 7.0 x 4.4 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 89040241
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2010 Chevrolet Colorado Upper Ball Joint Part Number: 89040242
$140.00 MSRP: $245.61
You Save: $105.61 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint Kit, Front Upper Control Arm Ball; Suspension Ball Joint; Ball Joint; Upper Ball Joints; Joint Kit, Steering Knuckle Upper Control Arm
- Position: Front Upper
- Item Weight: 3.20 Pounds
- Item Dimensions: 10.0 x 9.7 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 89040242
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2010 Chevrolet Colorado Lower Ball Joint Part Number: 89040240
Product Specifications
- Other Name: Joint Kit, Front Lower Control Arm Ball; Suspension Ball Joint; Ball Joint; Joint Kit, Steering Knuckle Lower Control Arm Pivot
- Position: Front Lower
- Item Weight: 2.50 Pounds
- Item Dimensions: 8.1 x 5.3 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 89040240
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

2010 Chevrolet Colorado Ball Joint

With a comprehensive array of OEM 2010 Chevrolet Colorado Ball Joint, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Colorado Ball Joint are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Colorado Ball Joint Parts and Q&A

Q: How to replace the upper control arm ball joint on both 4WD and 2WD on 2010 Chevrolet Colorado?
A: You need to lift your car securely when working on the upper Control Arm Ball Joint for both 4wd and 2wd models. Support the vehicle by placing a jack stand under the lower Control Arm assembly when you take off its tire and wheel. Detach the front brake hose from the Control Arm while removing the wheel speed sensor bracket bolt and bracket connections. To remove the upper Control Arm from the ball stud remove all retention nuts and discard them before taking out the nut from the upper Ball Joint. Place the j-42188-b Ball Joint separator across the Ball Joint and Steering Knuckle to disengage them and take out the Ball Joint. Secure the new Ball Joint to the Steering Knuckle according to fastener guidelines when putting it in place. Apply a new upper Ball Joint nut and tighten it to 75 nm (55 lb ft) torque. Put retention nuts through the upper Control Arm and ball stud before tightening them to 47 nm (35 lb ft). Reinstall the two wheel speed sensor brackets then fasten their bolt to 20 nm (15 lb ft). Hook the front brake hose to the upper Control Arm then place the tire and wheel assembly back before taking out the lower Control Arm stand and putting the vehicle down. Finally, verify the wheel alignment.