How to replace the 4WD Actuator Encoder Motor on 2010 Chevrolet Colorado?

In order to change Transfer Case Encoder Motor, elevate and hold the vehicle. Unscrew the electrical connector and vent hose, unscrew the encoder motor and O-ring seal. Make sure that the actuator shaft is neutral centered, wipe the new O-ring and fit the encoder motor. Re-attach the electrical connector and vent hose and then lower the vehicle.

OEM 2010 Chevrolet Colorado 4WD Actuator

Four-Wheel Drive Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 4WD Actuator found

View related parts
2010 Chevrolet Colorado Switch Actuator, Front Part Number: 26060073
$152.29 MSRP: $259.27
You Save: $106.98 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator, Front Drive Axle; 4WD Actuator; Switch; Actuator; Actuator, Front Drive Axle Shifter/Lock
- Position: Front
- Item Weight: 4.10 Pounds
- Item Dimensions: 8.5 x 3.3 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26060073
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

2010 Chevrolet Colorado 4WD Actuator

With a comprehensive array of OEM 2010 Chevrolet Colorado 4WD Actuator, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Colorado 4WD Actuator are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Colorado 4WD Actuator Parts and Q&A

Q: How to replace the 4WD Actuator Encoder Motor on 2010 Chevrolet Colorado?
A: In order to change Transfer Case Encoder Motor, elevate and hold the vehicle. Unscrew the electrical connector and vent hose, unscrew the encoder motor and O-ring seal. Make sure that the actuator shaft is neutral centered, wipe the new O-ring and fit the encoder motor. Re-attach the electrical connector and vent hose and then lower the vehicle.