OEM 2010 Chevrolet Cobalt Clutch Master Cylinder

2010 Chevrolet Cobalt Clutch Master Cylinder Parts and Q&A

• Q: How to replace the Clutch Master Cylinder (MU3) on 2010 Chevrolet Cobalt?

  A: Start the replacement of the Clutch Master Cylinder (MU3) by removing the clutch pedal retainer from its position on the front of the clutch pedal assembly followed by pulling the clutch pedal upward to detach the Pushrod from the pedal. Next, remove the ubec. Cautions exist in relation to both paint damage and electrical component breakdowns from brake fluid exposure. Before disconnecting the Clutch Hose and clutch line from the master cylinder place a shop towel under the master cylinder to catch any violating fluid. Screw on protective caps to the reservoir and hydraulic lines before rotating the Clutch Master Cylinder one 1/4 turn clockwise and pulling it out from the vehicle. Start by positioning the Pushrod along the clutch pedal before you put in the Clutch Master Cylinder by turning it counterclockwise 1/4 turn. Remove caps from reservoir and hydraulic lines then attach the clutch line and Clutch Hose to the master cylinder along with reinstallation of the ubec. Solve the collection pipe to the clutch pedal afterward place the clutch pedal retainer then complete the bleeding procedure for the clutch's hydraulic system.