How to replace the engine coolant fan shroud (LGD, LZ9) (3.9L) on 2010 Buick Lucerne?

To replace the engine coolant fan shroud, disconnect the battery negative cable and remove the condenser, upper tie bar and drain the cooling system. Raise the vehicle, remove the front air deflector and disconnect hoses and lines. Remove the fan shroud assembly, install the new fan shroud assembly, and reconnect all components. Finally, fill the cooling system and re-connect the battery.

OEM 2010 Buick Lucerne Fan Shroud

Radiator Fan Shroud

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fan Shroud found

View related parts
2010 Buick Lucerne Fan Shroud Part Number: 21999691
Product Specifications
- Other Name: Shroud Assembly-Engine Coolant Fan; Dual Radiator and Condenser Fan Assembly; Cooling Fan Assembly; Shroud, Engine Air Cooling(Electrical); Shroud, Radiator Fan Shroud
- Item Weight: 2.60 Pounds
- Item Dimensions: 36.2 x 20.7 x 10.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 21999691
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS

2010 Buick Lucerne Fan Shroud

With a comprehensive array of OEM 2010 Buick Lucerne Fan Shroud, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Buick Lucerne Fan Shroud are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Buick Lucerne Fan Shroud Parts and Q&A

Q: How to replace the engine coolant fan shroud (LGD, LZ9) (3.9L) on 2010 Buick Lucerne?
A: To replace the engine coolant fan shroud, disconnect the battery negative cable and remove the condenser, upper tie bar and drain the cooling system. Raise the vehicle, remove the front air deflector and disconnect hoses and lines. Remove the fan shroud assembly, install the new fan shroud assembly, and reconnect all components. Finally, fill the cooling system and re-connect the battery.