How to replace the Engine Mount Bracket on 2009 Chevrolet Cobalt?

The first step to replace an Engine Mount Bracket involves Engine Mount removal before proceeding. You need to start by removing both Engine Mount Bracket to engine bolts then you can pull out the Engine Mount Bracket. Position the Engine Mount Bracket on the engine before installing the bolts where you must use long bolts in forward and lower front holes and a short bolt in the upper rear hole. Adhere to the fastener warning from the manufacturer to stop vehicle damage. Tighten the Engine Mount Bracket bolts starting with 100 nm (74 lb ft) torque while following the specified sequence then reattach the Engine Mount.

OEM 2009 Chevrolet Cobalt Engine Mount Bracket

Engine Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Engine Mount Brackets found

View related parts
2009 Chevrolet Cobalt Mounting Bracket Part Number: 15854396
$81.92 MSRP: $128.33
You Save: $46.41 (37%)
Product Specifications
- Other Name: Adapter, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Mount Bracket; Front Mount Bracket; Adapter; Bracket, Engine Mounting
- Replaces: 22689529
- Item Weight: 1.80 Pounds
- Item Dimensions: 10.2 x 5.7 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15854396
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Chevrolet Cobalt Front Mount Part Number: 25974060
Product Specifications
- Other Name: Mount, Engine Mount Dampening; Engine Mount Bracket; Motor Mount; Mount; Mount, Engine Mounting
- Replaces: 25877466
- Item Weight: 4.20 Pounds
- Item Dimensions: 6.1 x 6.1 x 11.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25974060
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Cobalt Submodels:
- SS | 4 Cyl 2.0 L GAS

2009 Chevrolet Cobalt Engine Mount Bracket

With a comprehensive array of OEM 2009 Chevrolet Cobalt Engine Mount Bracket, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Cobalt Engine Mount Bracket are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Cobalt Engine Mount Bracket Parts and Q&A

Q: How to replace the Engine Mount Bracket on 2009 Chevrolet Cobalt?
A: The first step to replace an Engine Mount Bracket involves Engine Mount removal before proceeding. You need to start by removing both Engine Mount Bracket to engine bolts then you can pull out the Engine Mount Bracket. Position the Engine Mount Bracket on the engine before installing the bolts where you must use long bolts in forward and lower front holes and a short bolt in the upper rear hole. Adhere to the fastener warning from the manufacturer to stop vehicle damage. Tighten the Engine Mount Bracket bolts starting with 100 nm (74 lb ft) torque while following the specified sequence then reattach the Engine Mount.