OEM 2009 Cadillac SRX Automatic Transmission Filter

2009 Cadillac SRX Automatic Transmission Filter Parts and Q&A

• Q: How to Remove and Replace the Automatic Transmission Filter and Fluid for the 5L40-E/5L50-E on 2009 Cadillac SRX?

  A: The first task is to position the vehicle with a lift system before you can begin replacing or replacing automatic transmission fluid and filter components for the 5l40-e/5l50-e. Proceed by positioning a drain pan under the transmission fluid pan and gently undebug the bolts on three sides. To break the gasket seal gently strike the fluid pan with a rubber mallet while the fluid drain process begins for inspection of discoloration and contamination within the transmission fluid. The first step is to remove the fluid pan bolts before taking off the fluid pan with its gasket . The magnet along with pan needs examination as well as inspection for any signs of damage followed by evaluation of bolts and gasket. The fluid filter requires a long screwdriver for removal. Next remove the two fluid filter seals with the tools j 23129 and j 6125-1b. Two new fluid filter seals require placement onto the transmission fluid filter neck followed by application of a small j 36850 or petroleum jelly coating prior to installation. Place the transmission fluid filter into the case before using the undamaged fluid pan gasket or replacing it with new material. When installing the fluid pan with its gasket apply them together before tightening the fluid pan bolts to 11 nm (97 lb in). Check whether the transmission contains the correct amount of fluid before lowering the vehicle for a gasket leak check of the oil pan.