ChevyParts
My Garage
My Account
Cart
OEM 2009 Cadillac DTS Starter
Starter Ignition- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Starter found
2009 Cadillac DTS Starter Part Number: 89017760
$215.77 MSRP: $473.76You Save: $257.99 (55%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Starter (Remanufacture); Starter Motor; Starter, Starter Motor
- Item Weight: 8.30 Pounds
- Item Dimensions: 6.4 x 6.4 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89017760
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2009 Cadillac DTS Starter
With a comprehensive array of OEM 2009 Cadillac DTS Starter, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Cadillac DTS Starter are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2009 Cadillac DTS Starter Parts and Q&A
- Q: How to replace the starter motor on 2009 Cadillac DTS?A: Before starting the Starter motor replacement process you must disconnect the negative Battery Cable. Next, remove the Intake Manifold. Start by unscrewing the "bat" terminal nut followed by the "s" terminal nut from the Starter motor. Once completed disconnect the Starter solenoid cable from its position. Begin by removing both Starter motor bolts before completely removing the Starter motor unit. Begin Starter motor installation by fitting the device into its slot in the Starter solenoid retention area while ensuring that the large terminal locator tab is properly located. Tighten all Starter motor bolts to a torque specification of 25 nm (18 lb ft). Connect the Starter solenoid cable to the Starter before you install and tighten the "s" terminal nut to 4 nm (35 lb in) torque then move to the "bat" terminal nut at 10 nm (89 lb in). Reinstall both the Intake Manifold while also reconnecting the negative Battery Cable.
