How to replace the Crankshaft Position Sensor on 2008 GMC Yukon?

In order to replace the Crankshaft Position Sensor, disconnect the wheel well engine wiring harness with the CKP sensor and remove the starter. Wipe the spot and take off the CKP sensor and bolt. Re-fit the CKP sensor, reconnect the wiring and re-fit the starter. Do Crankshaft Position System Variation Learn later.

OEM 2008 GMC Yukon Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Position Sensor found

View related parts
2008 GMC Yukon Crankshaft Position Sensor Part Number: 12703627
$60.13 MSRP: $107.38
You Save: $47.25 (44%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 12585546
- Item Weight: 2.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12703627
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 GMC Yukon Submodels:
- Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS

2008 GMC Yukon Crankshaft Position Sensor

With a comprehensive array of OEM 2008 GMC Yukon Crankshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 GMC Yukon Crankshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 GMC Yukon Crankshaft Position Sensor Parts and Q&A

Q: How to replace the Crankshaft Position Sensor on 2008 GMC Yukon?
A: In order to replace the Crankshaft Position Sensor, disconnect the wheel well engine wiring harness with the CKP sensor and remove the starter. Wipe the spot and take off the CKP sensor and bolt. Re-fit the CKP sensor, reconnect the wiring and re-fit the starter. Do Crankshaft Position System Variation Learn later.