How to replace the torsion bar on 2008 GMC Canyon?

To remove the Torsion Bar, it is necessary first, raise and support the vehicle. Let the front suspension settle in the rebound position and note the number of turns it takes to release the adjuster bolt, making a note to use exactly that number of turns for re-assembly. Remove the adjuster bolt, spacer, and adjuster nut, keeping in mind that the torsion bars have specific applications for the left and right sides of the vehicle. Then, swap out the adjustment arms and torsion bars as a complete unit by pulling it to the rear to release the lower Control Arm. Install: place adjustment arms and torsion bars relative to its original position, attach adjustment arm to Torsion Bar, and slide Torsion Bar forward until it completes entering into lower Control Arm. Mount the adjuster bolt, spacer, and adjuster nut and lower the vehicle and measure the z-height to the trim height specifications.

OEM 2008 GMC Canyon Torsion Bar

Suspension Torsion Bar

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Torsion Bars found

View related parts
2008 GMC Canyon Torsion Bar, Front Passenger Side Part Number: 20784587
Product Specifications
- Other Name: Bar-Front Torsion
- Position: Front Passenger Side
- Replaces: 15167960
- Item Weight: 13.70 Pounds
- Item Dimensions: 46.8 x 1.8 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20784587
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2008 GMC Canyon Torsion Bar, Front Passenger Side Part Number: 20784589
Product Specifications
- Other Name: Bar-Front Torsion
- Position: Front Passenger Side
- Replaces: 15173585
- Item Weight: 14.30 Pounds
- Item Dimensions: 46.4 x 1.8 x 1.7 inches
- Condition: New
- SKU: 20784589
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
2008 GMC Canyon Torsion Bar, Front Driver Side Part Number: 19332965
Product Specifications
- Other Name: Bar, Front Torsion; Bar, Front Chassis
- Position: Front Driver Side
- Replaces: 20784586, 15167959
- Item Weight: 14.10 Pounds
- Item Dimensions: 48.2 x 1.7 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19332965
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2008 GMC Canyon Torsion Bar, Front Passenger Side Part Number: 15100047
Product Specifications
- Other Name: Bar-Front Torsion; Bar, Front Chassis
- Position: Front Passenger Side
- Item Weight: 12.50 Pounds
- Item Dimensions: 46.8 x 1.4 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15100047
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
2008 GMC Canyon Torsion Bar, Front Driver Side Part Number: 15100046
Product Specifications
- Other Name: Bar-Front Torsion; Bar, Front Chassis
- Position: Front Driver Side
- Item Weight: 13.50 Pounds
- Item Dimensions: 47.9 x 1.8 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15100046
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
2008 GMC Canyon Torsion Bar, Front Driver Side Part Number: 19332967
$67.40 MSRP: $105.58
You Save: $38.18 (37%)
Product Specifications
- Other Name: Bar, Front Torsion; Bar, Front Chassis
- Position: Front Driver Side
- Replaces: 15173584, 20784588
- Item Weight: 13.90 Pounds
- Item Dimensions: 47.3 x 1.7 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19332967
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS

2008 GMC Canyon Torsion Bar

With a comprehensive array of OEM 2008 GMC Canyon Torsion Bar, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 GMC Canyon Torsion Bar are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 GMC Canyon Torsion Bar Parts and Q&A

Q: How to replace the torsion bar on 2008 GMC Canyon?
A: To remove the Torsion Bar, it is necessary first, raise and support the vehicle. Let the front suspension settle in the rebound position and note the number of turns it takes to release the adjuster bolt, making a note to use exactly that number of turns for re-assembly. Remove the adjuster bolt, spacer, and adjuster nut, keeping in mind that the torsion bars have specific applications for the left and right sides of the vehicle. Then, swap out the adjustment arms and torsion bars as a complete unit by pulling it to the rear to release the lower Control Arm. Install: place adjustment arms and torsion bars relative to its original position, attach adjustment arm to Torsion Bar, and slide Torsion Bar forward until it completes entering into lower Control Arm. Mount the adjuster bolt, spacer, and adjuster nut and lower the vehicle and measure the z-height to the trim height specifications.