How to replace the steering knuckle on 2008 GMC Canyon?

To change the steering knuckle, lift and support the vehicle, remove the tire and wheel assembly. Support the lower control arm and take off brake caliper assembly. If 4WD, disconnect the front drive shaft. Remove the speed sensor wiring, outer tie rod end and ball joints. Install the new knuckle and components, then put the car down.

OEM 2008 GMC Canyon Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Steering Knuckles found

View related parts
2008 GMC Canyon Knuckle, Passenger Side Part Number: 19303833
Product Specifications
- Other Name: Knuckle, Steering
- Position: Passenger Side
- Replaces: 15178871
- Item Weight: 9.90 Pounds
- Item Dimensions: 14.2 x 10.3 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19303833
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
2008 GMC Canyon Knuckle, Driver Side Part Number: 19303836
Product Specifications
- Other Name: Knuckle, Steering
- Position: Driver Side
- Replaces: 15184896
- Item Weight: 10.10 Pounds
- Item Dimensions: 11.6 x 11.1 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19303836
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
2008 GMC Canyon Knuckle, Passenger Side Part Number: 19303835
Product Specifications
- Other Name: Knuckle, Steering
- Position: Passenger Side
- Replaces: 15184895
- Item Weight: 11.40 Pounds
- Item Dimensions: 11.4 x 11.4 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19303835
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
2008 GMC Canyon Knuckle, Driver Side Part Number: 19303834
$257.84 MSRP: $405.70
You Save: $147.86 (37%)
Product Specifications
- Other Name: Knuckle, Steering
- Position: Driver Side
- Replaces: 15178872
- Item Weight: 9.40 Pounds
- Item Dimensions: 13.4 x 10.4 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19303834
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
2008 GMC Canyon Knuckle, Driver Side Part Number: 15178874
Product Specifications
- Other Name: Knuckle, Steering
- Position: Driver Side
- Item Weight: 9.70 Pounds
- Item Dimensions: 11.9 x 9.9 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15178874
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
2008 GMC Canyon Knuckle, Passenger Side Part Number: 15178873
Product Specifications
- Other Name: Knuckle, Steering
- Position: Passenger Side
- Item Weight: 9.70 Pounds
- Item Dimensions: 12.4 x 9.9 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15178873
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS

2008 GMC Canyon Steering Knuckle

With a comprehensive array of OEM 2008 GMC Canyon Steering Knuckle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 GMC Canyon Steering Knuckle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 GMC Canyon Steering Knuckle Parts and Q&A

Q: How to replace the steering knuckle on 2008 GMC Canyon?
A: To change the steering knuckle, lift and support the vehicle, remove the tire and wheel assembly. Support the lower control arm and take off brake caliper assembly. If 4WD, disconnect the front drive shaft. Remove the speed sensor wiring, outer tie rod end and ball joints. Install the new knuckle and components, then put the car down.