How to replace the brake master cylinder on 2008 Chevrolet Equinox?

In order to fit a new brake master cylinder, disconnect the electrical level indicator switch of the brake fluid and remove the underhood electrical center bracket. Unscrew the brake pipes and insert the ends and take out the master cylinder. Install brake pipes, install it, bench bleed it, and reconnect the electrical connector, then bleed the hydraulic brake system.

OEM 2008 Chevrolet Equinox Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Master Cylinder found

View related parts
2008 Chevrolet Equinox Master Cylinder Part Number: 19151463
$85.41 MSRP: $240.49
You Save: $155.08 (65%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Kit, Brake Master; Brake Master Cylinder; Cylinder Kit, Brake Master Cylinder
- Item Weight: 1.60 Pounds
- Item Dimensions: 8.7 x 4.9 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19151463
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Equinox Submodels:
- LS, LT, LTZ, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS

2008 Chevrolet Equinox Brake Master Cylinder

With a comprehensive array of OEM 2008 Chevrolet Equinox Brake Master Cylinder, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Equinox Brake Master Cylinder are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Equinox Brake Master Cylinder Parts and Q&A

Q: How to replace the brake master cylinder on 2008 Chevrolet Equinox?
A: In order to fit a new brake master cylinder, disconnect the electrical level indicator switch of the brake fluid and remove the underhood electrical center bracket. Unscrew the brake pipes and insert the ends and take out the master cylinder. Install brake pipes, install it, bench bleed it, and reconnect the electrical connector, then bleed the hydraulic brake system.