How to replace the brake fluid level sensor on 2008 Chevrolet Equinox?

Removing the underhood electrical center bracket and disconnecting the electrical connector of the switch are required in order to replace Brake Fluid Level Indicator Switch. Press the retaining tabs down and remove the switch out of the master cylinder reservoir. Install the installation of the new switch with proper orientation and reconnect the electrical connector to the bracket and then replace the bracket.

OEM 2008 Chevrolet Equinox Brake Fluid Level Sensor

Brake Fluid Liquid Level Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Fluid Level Sensor found

View related parts
2008 Chevrolet Equinox Level Indicator Part Number: 96626031
$17.28 MSRP: $32.48
You Save: $15.20 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Brake Master Cylinder Reservoir; Fluid Level Switch
- Item Weight: 0.30 Pounds
- Item Dimensions: 4.2 x 4.1 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96626031
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Equinox Submodels:
- L, LS, LT, LTZ, Premier, Sport | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS

2008 Chevrolet Equinox Brake Fluid Level Sensor

With a comprehensive array of OEM 2008 Chevrolet Equinox Brake Fluid Level Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Equinox Brake Fluid Level Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Equinox Brake Fluid Level Sensor Parts and Q&A

Q: How to replace the brake fluid level sensor on 2008 Chevrolet Equinox?
A: Removing the underhood electrical center bracket and disconnecting the electrical connector of the switch are required in order to replace Brake Fluid Level Indicator Switch. Press the retaining tabs down and remove the switch out of the master cylinder reservoir. Install the installation of the new switch with proper orientation and reconnect the electrical connector to the bracket and then replace the bracket.