How to replace the accessory drive belt on 2008 Chevrolet Corvette?

Replacement of the accessory Drive Belt starts by taking out the intake duct if needed. A proper tool must be attached to the Drive Belt tensioner bolt before clockwise rotation to reduce tension on the accessory Drive Belt. After removing the pulleys and tensioner the belt will be followed by a step-by-step tension release of the Drive Belt tensioner before you remove the breaker bar and socket from the tensioner bolt. An inspection of the Drive Belt surfaces exists for all pulleys that need cleaning. The installation process requires the accessory Drive Belt to cross all pulleys except the water pump and tensioner and to install the right tool to the Drive Belt tensioner. Start by turning the tensioner in a clockwise direction to create released tension and then place the accessory Drive Belt under the Water Pump Pulley before continuing it to the Drive Belt tensioner. Afterward, lower the tensioner. You should end the tension process by taking out the tool from the tensioner before reinstalling the air intake duct, if required. Correct alignment of the accessory Drive Belt requires a final inspection process.

OEM 2008 Chevrolet Corvette Drive Belt

Serpentine Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Drive Belts found

View related parts
2008 Chevrolet Corvette Serpentine Belt Part Number: 12636226
$38.04 MSRP: $64.67
You Save: $26.63 (42%)
ADD TO CART
Product Specifications
- Other Name: Belt; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt, Drive
- Replaces: 12579229
- Item Weight: 0.70 Pounds
- Item Dimensions: 19.6 x 4.1 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12636226
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2008 Chevrolet Corvette A/C Belt Part Number: 12636225
$18.50 MSRP: $31.49
You Save: $12.99 (42%)
ADD TO CART
Product Specifications
- Other Name: Belt, Drive; Serpentine Belt Drive Kit; Accessory Drive Belt; Serpentine Belt; Drive Belt; V-Belt
- Replaces: 12579228
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.1 x 3.2 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12636225
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Corvette Submodels:
- Base, Grand Sport | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
2008 Chevrolet Corvette A/C Belt Part Number: 12585476
Product Specifications
- Other Name: Belt, Drive; Serpentine Belt Drive Kit; Accessory Drive Belt; Serpentine Belt; Drive Belt; V-Belt
- Item Weight: 0.40 Pounds
- Item Dimensions: 5.1 x 10.9 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12585476
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Corvette Submodels:
- 427 Limited Edition Z06, Z06 | 8 Cyl 7.0 L GAS

2008 Chevrolet Corvette Drive Belt

With a comprehensive array of OEM 2008 Chevrolet Corvette Drive Belt, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Corvette Drive Belt are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Corvette Drive Belt Parts and Q&A

Q: How to replace the accessory drive belt on 2008 Chevrolet Corvette?
A: Replacement of the accessory Drive Belt starts by taking out the intake duct if needed. A proper tool must be attached to the Drive Belt tensioner bolt before clockwise rotation to reduce tension on the accessory Drive Belt. After removing the pulleys and tensioner the belt will be followed by a step-by-step tension release of the Drive Belt tensioner before you remove the breaker bar and socket from the tensioner bolt. An inspection of the Drive Belt surfaces exists for all pulleys that need cleaning. The installation process requires the accessory Drive Belt to cross all pulleys except the water pump and tensioner and to install the right tool to the Drive Belt tensioner. Start by turning the tensioner in a clockwise direction to create released tension and then place the accessory Drive Belt under the Water Pump Pulley before continuing it to the Drive Belt tensioner. Afterward, lower the tensioner. You should end the tension process by taking out the tool from the tensioner before reinstalling the air intake duct, if required. Correct alignment of the accessory Drive Belt requires a final inspection process.