How to replace the blower motor on 2008 Chevrolet Corvette?

The right hand (RH) insulator panel needs to be taken out before replacing the Blower Motor. Disconnecting the Blower Motor prevents accidental start-up because the fan will activate when the component touches earth and threatens harm. The Blower Motor Resistor stays attached to the Blower Motor assembly and technicians cannot separate and replace it without disassembling the unit. To start disconnect the Blower Motor electrical connector before removing the retaining screws to take out the Blower Motor from its place in the hvac unit. To correctly install the Blower Motor return it into the hvac module while following the provided fastener guidance. Reattach the motor blower with retaining screws and torque them to 1.6n.m before reinserting the electrical plug and restoring the right-hand insulator panel.

OEM 2008 Chevrolet Corvette Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor found

View related parts
2008 Chevrolet Corvette Blower Motor Part Number: 23456469
$249.71 MSRP: $513.15
You Save: $263.44 (52%)
ADD TO CART
Product Specifications
- Other Name: Motor Assembly-Blower; HVAC Blower Motor; Blower Assembly; Motor, A/C Evaporator Blower; Motor, Heater Blower Motor
- Replaces: 22992235, 89018255, 89018845
- Item Weight: 3.10 Pounds
- Item Dimensions: 13.8 x 12.5 x 9.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 23456469
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Stingray, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS

2008 Chevrolet Corvette Blower Motor

With a comprehensive array of OEM 2008 Chevrolet Corvette Blower Motor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Corvette Blower Motor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Corvette Blower Motor Parts and Q&A

Q: How to replace the blower motor on 2008 Chevrolet Corvette?
A: The right hand (RH) insulator panel needs to be taken out before replacing the Blower Motor. Disconnecting the Blower Motor prevents accidental start-up because the fan will activate when the component touches earth and threatens harm. The Blower Motor Resistor stays attached to the Blower Motor assembly and technicians cannot separate and replace it without disassembling the unit. To start disconnect the Blower Motor electrical connector before removing the retaining screws to take out the Blower Motor from its place in the hvac unit. To correctly install the Blower Motor return it into the hvac module while following the provided fastener guidance. Reattach the motor blower with retaining screws and torque them to 1.6n.m before reinserting the electrical plug and restoring the right-hand insulator panel.