ChevyParts
My Garage
My Account
Cart
OEM 2008 Cadillac SRX CV Boot
Axle Boot- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 CV Boots found
2008 Cadillac SRX Outer CV Joint Boot Part Number: 88957226
$57.16 MSRP: $97.30You Save: $40.14 (42%)Product Specifications- Other Name: Boot Kit, Front Axle; CV Boot; Outer Boot; Boot Kit, Front Wheel Drive Axle Shaft
- Position: Front
- Item Weight: 1.10 Pounds
- Item Dimensions: 7.9 x 7.8 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88957226
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2008 Cadillac SRX Inner CV Joint Boot Part Number: 88957225
$63.99 MSRP: $95.95You Save: $31.96 (34%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Boot Kit, Front Wheel Drive Axle Shaft; CV Boot; Inner Boot
- Position: Front
- Item Weight: 1.40 Pounds
- Item Dimensions: 7.8 x 7.8 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88957225
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2008 Cadillac SRX Outer Boot Part Number: 88957228
Product Specifications- Other Name: Boot Kit, Rear Axle Universal Joint; CV Boot; Inner Boot
- Position: Rear
- Replaces: 15868855
- Item Weight: 1.20 Pounds
- Item Dimensions: 11.4 x 10.9 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 88957228
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2008 Cadillac SRX Outer Boot Part Number: 88957230
Product Specifications- Other Name: Boot Kit, Rear Axle Universal Joint; CV Boot; Inner Boot
- Position: Rear
- Item Weight: 1.30 Pounds
- Item Dimensions: 11.1 x 10.7 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88957230
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2008 Cadillac SRX Inner Boot Part Number: 88957227
Product Specifications- Other Name: Boot Kit, Rear Axle Universal Joint; CV Boot; Outer Boot
- Position: Rear
- Replaces: 15868856
- Item Weight: 1.10 Pounds
- Item Dimensions: 8.5 x 4.4 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88957227
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2008 Cadillac SRX Inner Boot Part Number: 88957229
Product Specifications- Other Name: Boot Kit, Rear Axle Universal Joint; CV Boot; Outer Boot
- Position: Rear
- Item Weight: 0.80 Pounds
- Item Dimensions: 8.2 x 4.3 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 88957229
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2008 Cadillac SRX CV Boot
With a comprehensive array of OEM 2008 Cadillac SRX CV Boot, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Cadillac SRX CV Boot are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2008 Cadillac SRX CV Boot Parts and Q&A
- Q: How to replace the front outer CV Boot and CV Joint on 2008 Cadillac SRX?A: In order to remove the front-wheel drive shaft: gather the necessary tools: drive shaft seal clamp pliers (J 42572). Start by wrapping a shop towel over the Axle Shaft and laying the wheel drive shaft horizontally in a bench vise. Cut off and throw away the large and small seal retaining clamps from the outer joint seal using a side cutter or appropriate tool. Remove the seal off of the joint outer race wipe the grease off from the joint inner race or cage and balls then remove the outer joint end of the Axle Shaft by loading the outer joint housing horizontally set a wood block in between the seal and the joint then strike the wood block with a hammer to squeeze the Axle Shaft retaining clip. If need be use a brass drift on the inner race to help for this. After the outer joint is removed, you may throw away the Axle Shaft retaining ring and seal, and wash the parts thoroughly with solvent while air drying. Check the inner race, outer race, cage, balls, and Axle Shaft for damage and wear out. For assembly, place the big radius corners up, pushing the inner race into the cage and making sure it is entirely assembled. Line up the inner race ball tracks with the cage windows, and wrap a shop towel around the joint outer race splined shaft, then put the outer race in a bench vise vertically. Line up the cage and inner race with the outer one, introduce the balls in sequence, and fill the outer joint with about 60 percent of the grease from the service kit. Following the installation of the seal and new retaining ring on the Axle Shaft, then engage the inner race splines onto the Axle Shaft splines, compress the Axle Shaft retaining ring, and drive the outer joint onto the shaft using a wood block and hammer. Finally, crimp the small and large seal retaining clamps with drive shaft seal clamp pliers (J 42572) by ensuring that you have good tension and also inspect the outer joint for smooth operation by spinning the wheel drive shaft for several times.
Related 2008 Cadillac SRX Parts
2008 Cadillac SRX Differential
2008 Cadillac SRX Drive Shaft
2008 Cadillac SRX CV Joint
2008 Cadillac SRX Differential Cover
2008 Cadillac SRX Differential Seal