How to properly install a Brake Fluid Level Sensor on 2008 Cadillac DTS?

In order to change the backing plate of the drum brake, it is necessary to raise the vehicle and unscrew the parts of the brake shoe. Uncouple the brake line, take out the wheel cylinder and hub assemblies and disassemble the backing plate. Then install the new backing plate with a gasket, reconnect components, and bleed the brakes and then lower the vehicle.

OEM 2008 Cadillac DTS Brake Fluid Level Sensor

Brake Fluid Liquid Level Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Fluid Level Sensor found

View related parts
2008 Cadillac DTS Level Sensor Part Number: 18012741
$12.95 MSRP: $25.15
You Save: $12.20 (49%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Brake Master Cylinder Reservoir; Brake Proportioning Valve; Level Indicator; Fluid Sensor; Brake Pressure Warning Switch; Pressure Metering Valve; Reservoir, Brake Master Cylinder
- Replaces: 18029973, 18043666, 18040246
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.2 x 1.3 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18012741
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS

2008 Cadillac DTS Brake Fluid Level Sensor

With a comprehensive array of OEM 2008 Cadillac DTS Brake Fluid Level Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Cadillac DTS Brake Fluid Level Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Cadillac DTS Brake Fluid Level Sensor Parts and Q&A

Q: How to properly install a Brake Fluid Level Sensor on 2008 Cadillac DTS?
A: In order to change the backing plate of the drum brake, it is necessary to raise the vehicle and unscrew the parts of the brake shoe. Uncouple the brake line, take out the wheel cylinder and hub assemblies and disassemble the backing plate. Then install the new backing plate with a gasket, reconnect components, and bleed the brakes and then lower the vehicle.