Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2008 Cadillac DTS Wheel Speed Sensor

ABS Wheel Speed Sensor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wheel Speed Sensor found

  • 2008 Cadillac DTS Wheel Speed Sensor - 25678857
    2008 Cadillac DTS Wheel Speed Sensor Diagram - 25678857
    View related parts

    2008 Cadillac DTS Front Speed Sensor Part Number: 25678857

    Product Specifications
    • Other Name: Sensor Assembly-Front Wheel Speed; ABS Sensor; Sensor, Electronic Brake Control
    • Position: Front
    • Item Weight: 0.60 Pounds
    • Item Dimensions: 6.1 x 6.2 x 2.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 25678857
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2008 Cadillac DTS Submodels:
    • Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS

2008 Cadillac DTS Wheel Speed Sensor

With a comprehensive array of OEM 2008 Cadillac DTS Wheel Speed Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Cadillac DTS Wheel Speed Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Cadillac DTS Wheel Speed Sensor Parts and Q&A

  • Q: How to replace the rear wheel speed sensor on 2008 Cadillac DTS?
    A: First, ensure the ignition is switched off and raise the vehicle yours setting the parking brake. Replace the rear wheel, and afterwards, separate the Wheel Speed Sensor connector from the Wheel Speed Sensor. Don't try to put the Wheel Speed Sensor back in use as a new one; simply discard it. After that, attach the new Wheel Speed Sensor to the hub assembly with the connector aiming toward the brake caliper. Install the ring on the Wheel Speed Sensor with the j 44252 installer, and pull the installer to make sure the sensor is seated correctly. You should touch the dmm to the Wheel Speed Sensor connector, choose ac voltage, and manually rotate the wheel to check the output. You'll see more than 100 mv if the signal is working correctly. At the end, you should connect the Wheel Speed Sensor connector, put the rear wheel back on, and lower the vehicle.

Related 2008 Cadillac DTS Parts

Alternate Year Models

+
2007 Cadillac DTS Wheel Speed Sensor 2009 Cadillac DTS Wheel Speed Sensor