How to replace the MAP Sensor on 2008 Buick Lucerne?

Starting the Manifold Absolute Pressure Sensor replacement requires removing the intake manifold cover. Begin by disconnecting the engine harness electrical connector from the MAP sensor then carefully remove the locking tabs before you can take out the sensor. Install the new MAP sensor by first checking the installation seal for proper condition before both positioning the sensor correctly and engaging its locking tabs. First reconnect the engine harness electrical connector to the MAP sensor before putting back the intake manifold cover.

OEM 2008 Buick Lucerne MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2008 Buick Lucerne M.A.P. Sensor Part Number: 19418808
$73.36 MSRP: $125.98
You Save: $52.62 (42%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; MAP Sensor; Valve Assembly
- Replaces: 16249939, 09359409, 12614973, 16187556, 9359409
- Condition: New
- SKU: 19418808
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2008 Buick Lucerne Submodels:
- CX, CXL, CXS, Super | 6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS

2008 Buick Lucerne MAP Sensor

With a comprehensive array of OEM 2008 Buick Lucerne MAP Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Buick Lucerne MAP Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Buick Lucerne MAP Sensor Parts and Q&A

Q: How to replace the MAP Sensor on 2008 Buick Lucerne?
A: Starting the Manifold Absolute Pressure Sensor replacement requires removing the intake manifold cover. Begin by disconnecting the engine harness electrical connector from the MAP sensor then carefully remove the locking tabs before you can take out the sensor. Install the new MAP sensor by first checking the installation seal for proper condition before both positioning the sensor correctly and engaging its locking tabs. First reconnect the engine harness electrical connector to the MAP sensor before putting back the intake manifold cover.