How to replace the pickup cab emblem/nameplate on 2007 Chevrolet Silverado 1500 Classic?

Set the job by combining a Heat Gun (J 25070) and 3M(TM) scotch brite molding adhesive remover disk (3M(TM) P/N 07501). Put tape down before starting to shield and position the emblem spot. Press the Heat Gun (J 25070) 152 mm (6 in) from the surface while moving the tool in circles to warm up the emblem/nameplate for 30 seconds. Use a plastic tool to pull off the emblem/nameplate carefully and cleanse both its pickup cab panel surface and back with 3M(TM) adhesive remover disk (3M(TM) P/N 07501). VMP naptha should be used to clean the pickup cab surface. Mark the emblem/nameplate position on the surface and put tape based on these measured areas. Heat the pickup cab again using the gun to reach 21°C (70°F) without coming into contact with the emblem/adhesive side. Put the front end of the emblem/nameplate without backing onto the pickup cab panel before taking the backing off continuously. Use your hands to roll the emblem/nameplate over its surface then check if it sticks properly before removing the tape from the surrounding area.

OEM 2007 Chevrolet Silverado 1500 Classic Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Emblems found

View related parts
2007 Chevrolet Silverado 1500 Classic Nameplate, Rear Part Number: 15126056
$60.07 MSRP: $89.40
You Save: $29.33 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, End Gate And Rear Door Decoration; Emblem, Radiator Grille And Front End Ornamentation
- Position: Rear
- Replaces: 15034749, 15053248, 15675118, 15982992, 15998983
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.9 x 16.9 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15126056
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Silverado 1500 Classic Submodels:
- LS, LT, SS, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2007 Chevrolet Silverado 1500 Classic Nameplate, Outer Part Number: 15036132
$48.74 MSRP: $69.75
You Save: $21.01 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Cab And Load Carrier Outer Side Decoration; Plate, Side Panel Wheel Opening; Body Side Lower Front; Fuel Door & Body Side; Pickup Box Side Lower
- Position: Outer
- Replaces: 15646974, 15705586
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.5 x 2.2 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15036132
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Silverado 1500 Classic Submodels:
- Hybrid, LS, LT, SS, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2007 Chevrolet Silverado 1500 Classic Nameplate Part Number: 84674406
$42.15 MSRP: $60.31
You Save: $18.16 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate Assembly-End Gate Divider Name *Chrome; Emblem, End Gate And Rear Door Decoration; Plate, End Gate And Rear Door Decoration
- Replaces: 22884137, 15195869, 15029627
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84674406
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2007 Chevrolet Silverado 1500 Classic Submodels:
- LS, LT, SS, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2007 Chevrolet Silverado 1500 Classic Nameplate, Front Part Number: 15268796
$47.16 MSRP: $70.20
You Save: $23.04 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Front Side Door; Plate Assembly, Cab And Load Carrier Outer Side Decoration
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 11.7 x 1.9 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15268796
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Silverado 1500 Classic Submodels:
- LS, LT, SS, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2007 Chevrolet Silverado 1500 Classic Emblem, Front Part Number: 12335700
$80.11 MSRP: $119.24
You Save: $39.13 (33%)
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Item Weight: 0.60 Pounds
- Item Dimensions: 5.9 x 2.8 x 10.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12335700
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Silverado 1500 Classic Submodels:
- Hybrid, LS, LT, SS, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2007 Chevrolet Silverado 1500 Classic Nameplate, Front Part Number: 15825321
Product Specifications
- Other Name: Emblem, Front Side Door; Emblem, Cab And Load Carrier Outer Side Decoration
- Position: Front
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.9 x 1.6 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15825321
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Silverado 1500 Classic Submodels:
- Hybrid | 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV)

2007 Chevrolet Silverado 1500 Classic Emblem

With a comprehensive array of OEM 2007 Chevrolet Silverado 1500 Classic Emblem, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Silverado 1500 Classic Emblem are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Silverado 1500 Classic Emblem Parts and Q&A

Q: How to replace the pickup cab emblem/nameplate on 2007 Chevrolet Silverado 1500 Classic?
A: Set the job by combining a Heat Gun (J 25070) and 3M(TM) scotch brite molding adhesive remover disk (3M(TM) P/N 07501). Put tape down before starting to shield and position the emblem spot. Press the Heat Gun (J 25070) 152 mm (6 in) from the surface while moving the tool in circles to warm up the emblem/nameplate for 30 seconds. Use a plastic tool to pull off the emblem/nameplate carefully and cleanse both its pickup cab panel surface and back with 3M(TM) adhesive remover disk (3M(TM) P/N 07501). VMP naptha should be used to clean the pickup cab surface. Mark the emblem/nameplate position on the surface and put tape based on these measured areas. Heat the pickup cab again using the gun to reach 21°C (70°F) without coming into contact with the emblem/adhesive side. Put the front end of the emblem/nameplate without backing onto the pickup cab panel before taking the backing off continuously. Use your hands to roll the emblem/nameplate over its surface then check if it sticks properly before removing the tape from the surrounding area.