How to replace the secondary air inject check valve on 2007 Chevrolet Impala?

Then remove the exhaust crossover pipe and disconnect the AIR feed tube to replace the Secondary Air Injection Shutoff and Check Valve. Unplug engine wiring harness and then lift off AIR shutoff/check valve. Install a new gasket, place AIR check valve, tighten the bolts. Re-connect the wiring and feed tube AIR, and reposition the exhaust crossover pipe.

OEM 2007 Chevrolet Impala Air Inject Check Valve

Air Injection Reaction Check Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Air Inject Check Valve found

View related parts
2007 Chevrolet Impala Check Valve Part Number: 12659290
$304.32 MSRP: $584.64
You Save: $280.32 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve, Emission Control System; Diverter Valve; Shut-Off Valve
- Replaces: 12619123, 12609876
- Item Weight: 4.00 Pounds
- Item Dimensions: 16.2 x 9.1 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12659290
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Impala Submodels:
- 50th Anniversary Edition, LS, LT, LTZ, Police | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2007 Chevrolet Impala Air Inject Check Valve

With a comprehensive array of OEM 2007 Chevrolet Impala Air Inject Check Valve, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Impala Air Inject Check Valve are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Impala Air Inject Check Valve Parts and Q&A

Q: How to replace the secondary air inject check valve on 2007 Chevrolet Impala?
A: Then remove the exhaust crossover pipe and disconnect the AIR feed tube to replace the Secondary Air Injection Shutoff and Check Valve. Unplug engine wiring harness and then lift off AIR shutoff/check valve. Install a new gasket, place AIR check valve, tighten the bolts. Re-connect the wiring and feed tube AIR, and reposition the exhaust crossover pipe.