How to replace the battery sensor on 2007 Chevrolet HHR?

Before working on the battery current sensor you must unplug the battery negative cable then remove tape holding sensor to this wire. Remove the battery current sensor by taking it out of the negative Battery Cable. Pass the ground side of the negative Battery Cable through the battery current sensor before placing it in the suitable position and direction. Affix the battery current sensor to the negative Battery Cable with electrical tape before you return the cable to its correct position.

OEM 2007 Chevrolet HHR Battery Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Battery Sensor found

View related parts
2007 Chevrolet HHR Battery Current Sensor, Green Line Part Number: 13505369
$19.14 MSRP: $35.94
You Save: $16.80 (47%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Battery; Voltage Sensor; Negative Cable Cover; Sensor
- Replaces: 13502261
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.8 x 2.8 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 13505369
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS

2007 Chevrolet HHR Battery Sensor

With a comprehensive array of OEM 2007 Chevrolet HHR Battery Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet HHR Battery Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet HHR Battery Sensor Parts and Q&A

Q: How to replace the battery sensor on 2007 Chevrolet HHR?
A: Before working on the battery current sensor you must unplug the battery negative cable then remove tape holding sensor to this wire. Remove the battery current sensor by taking it out of the negative Battery Cable. Pass the ground side of the negative Battery Cable through the battery current sensor before placing it in the suitable position and direction. Affix the battery current sensor to the negative Battery Cable with electrical tape before you return the cable to its correct position.