How to replace the front air bag sensor on 2007 Chevrolet Express 2500?

In order to replace the inflatable restraint front end sensor, you need to disable the SIR and lift up the vehicle. Unscrew the electric connector and the nut holding the connector. Wipe the mounting area, attach the sensor, and screw in the nut. Reconnect the electrical connector, fit the CPA, lower the car and activate the SIR system.

OEM 2007 Chevrolet Express 2500 Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Air Bag Sensor found

View related parts
2007 Chevrolet Express 2500 Front Impact Sensor Part Number: 85597998
$211.81 MSRP: $316.66
You Save: $104.85 (34%)
Product Specifications
- Other Name: Sensor Assembly-Airbag Front End Discriminating; Front Sensor; Sensor, Inflatable Restraint System
- Position: Front
- Replaces: 15102173, 10371101
- Condition: New
- SKU: 85597998
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2007 Chevrolet Express 2500 Submodels:
- Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL

2007 Chevrolet Express 2500 Air Bag Sensor

With a comprehensive array of OEM 2007 Chevrolet Express 2500 Air Bag Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Express 2500 Air Bag Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Express 2500 Air Bag Sensor Parts and Q&A

Q: How to replace the front air bag sensor on 2007 Chevrolet Express 2500?
A: In order to replace the inflatable restraint front end sensor, you need to disable the SIR and lift up the vehicle. Unscrew the electric connector and the nut holding the connector. Wipe the mounting area, attach the sensor, and screw in the nut. Reconnect the electrical connector, fit the CPA, lower the car and activate the SIR system.