How to replace the brake fluid level sensor on 2007 Chevrolet Corvette?

In order to have a replacement of brake fluid level sensor, unplug the electrical connector. A needle nose pliers should be used to press the retaining tabs and take the sensor out of the reservoir. To construct it, install the new sensor, fasten it by pushing the tabs, and reconnect the electrical connector.

OEM 2007 Chevrolet Corvette Brake Fluid Level Sensor

Brake Fluid Liquid Level Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Fluid Level Sensor found

View related parts
2007 Chevrolet Corvette Level Sensor Part Number: 18012741
$12.95 MSRP: $25.15
You Save: $12.20 (49%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Brake Master Cylinder Reservoir; Brake Proportioning Valve; Level Indicator; Fluid Sensor; Brake Pressure Warning Switch; Pressure Metering Valve; Reservoir, Brake Master Cylinder
- Replaces: 18029973, 18043666, 18040246
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.2 x 1.3 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18012741
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Corvette Submodels:
- 427 Limited Edition Z06, Base, Z06 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS

2007 Chevrolet Corvette Brake Fluid Level Sensor

With a comprehensive array of OEM 2007 Chevrolet Corvette Brake Fluid Level Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Corvette Brake Fluid Level Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Corvette Brake Fluid Level Sensor Parts and Q&A

Q: How to replace the brake fluid level sensor on 2007 Chevrolet Corvette?
A: In order to have a replacement of brake fluid level sensor, unplug the electrical connector. A needle nose pliers should be used to press the retaining tabs and take the sensor out of the reservoir. To construct it, install the new sensor, fasten it by pushing the tabs, and reconnect the electrical connector.