How to replace the A/C Switch control module on 2007 Cadillac SRX?

Start by shutting down the engine while performing these steps: engage the parking brake and shift the transmission to its lowest gear position. Carefully remove the screw in the ashtray area before using your fingers to gently pull the right and left sides of the HVAC Control Module trim plate until it can be removed. After disconnecting the HVAC Control Module electrical connector along with the ash tray electrical connector you must remove the HVAC Control Module screws and take out the HVAC Control Module. Place the HVAC Control Module inside the trim plate before you install and tighten all HVAC Control Module screws to 2 n.m (18 lb in). After connecting the electrical connectors for hvac control as well as ash tray the operator should press down on the trim plate until the fixing tabs lock into position. Utilize the screw with 2 n.m (18 lb in) torque to attach it behind the ashtray until the transmission is in park then release the parking brake. The control module contains programming and setup documentation.

OEM 2007 Cadillac SRX A/C Switch

Air Conditioning Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 A/C Switches found

View related parts
2007 Cadillac SRX Heater Control, Rear Part Number: 15894095
$436.80 MSRP: $1055.94
You Save: $619.14 (59%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Control, Heater & A/C (W/Rear Window Defogger Switch); Climate Control Module; Blower Control Switch; Dash Control Unit; Control, Heater And A/C Control; Control, Rear Window Defogger
- Position: Rear
- Item Weight: 1.50 Pounds
- Item Dimensions: 14.7 x 10.5 x 7.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15894095
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2007 Cadillac SRX Fan Switch Part Number: 21996232
$92.93 MSRP: $190.96
You Save: $98.03 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Control Assembly-Auxiliary Blower; Blower Control Switch; Blower Motor Switch; Control, Heater And A/C Control
- Item Weight: 0.50 Pounds
- Item Dimensions: 7.9 x 6.5 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 21996232
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2007 Cadillac SRX Fan Switch Part Number: 21996233
Product Specifications
- Other Name: Control Assembly-Auxiliary Blower; Blower Control Switch; Blower Motor Switch; Control, Heater And A/C Control
- Replaces: 25725552
- Item Weight: 0.50 Pounds
- Item Dimensions: 7.6 x 6.3 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 21996233
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS

2007 Cadillac SRX A/C Switch

With a comprehensive array of OEM 2007 Cadillac SRX A/C Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Cadillac SRX A/C Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Cadillac SRX A/C Switch Parts and Q&A

Q: How to replace the A/C Switch control module on 2007 Cadillac SRX?
A: Start by shutting down the engine while performing these steps: engage the parking brake and shift the transmission to its lowest gear position. Carefully remove the screw in the ashtray area before using your fingers to gently pull the right and left sides of the HVAC Control Module trim plate until it can be removed. After disconnecting the HVAC Control Module electrical connector along with the ash tray electrical connector you must remove the HVAC Control Module screws and take out the HVAC Control Module. Place the HVAC Control Module inside the trim plate before you install and tighten all HVAC Control Module screws to 2 n.m (18 lb in). After connecting the electrical connectors for hvac control as well as ash tray the operator should press down on the trim plate until the fixing tabs lock into position. Utilize the screw with 2 n.m (18 lb in) torque to attach it behind the ashtray until the transmission is in park then release the parking brake. The control module contains programming and setup documentation.