Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2007 Cadillac DTS Engine Mount Torque Strut

Engine Torque Strut Mount
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Engine Mount Torque Strut found

  • 2007 Cadillac DTS Engine Mount Torque Strut - 20760911
    2007 Cadillac DTS Engine Mount Torque Strut - 20760911
    2007 Cadillac DTS Engine Mount Torque Strut Diagram - 20760911
    View related parts

    2007 Cadillac DTS Strut Mount Part Number: 20760911

    $42.91 MSRP: $73.70
    You Save: $30.79 (42%)
    ADD TO CART
    Product Specifications
    • Other Name: Strut, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Front Mount; Strut, Engine Mounting
    • Replaces: 25749806
    • Item Weight: 2.90 Pounds
    • Item Dimensions: 19.9 x 5.0 x 5.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 20760911
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2007 Cadillac DTS Submodels:
    • Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS

2007 Cadillac DTS Engine Mount Torque Strut

With a comprehensive array of OEM 2007 Cadillac DTS Engine Mount Torque Strut, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Cadillac DTS Engine Mount Torque Strut are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Cadillac DTS Engine Mount Torque Strut Parts and Q&A

  • Q: How to replace the right side Engine Mount Torque Strut on 2007 Cadillac DTS?
    A: The first step to replace the right side engine mount strut requires removing surge tank nuts followed by push pin retainer before extracting the surge tank from its mounting studs. Begin by removing both the engine mount strut brace bolt together with the nut then uninstall the entire engine mount strut brace piece. Following that installation requires the removal of the engine mount strut bolt along with the engine mount strut. Start engine mount strut installation by referring to the Fastener Notice and following its instructions. After installing the engine mount strut bolt you should apply torque until it reaches 70 N.m (52 lb ft). Install the engine mount strut brace before installing its bolt and nut according to torque specifications of 50 N.m tensions and 70 N.m for the nut. The last step entailed positioning the surge tank on its studs before installing surge tank nuts and push pin retainers which should be tightened to 6 N.m (53 lb in).

Related 2007 Cadillac DTS Parts

Alternate Year Models

+
2006 Cadillac DTS Engine Mount Torque Strut 2008 Cadillac DTS Engine Mount Torque Strut