How to replace the Crankshaft Position Sensor on 2007 Buick Terraza?

Crankshaft Position Sensor replacement requires Exhaust Manifold removal first. Remove the engine harness connector from the Crankshaft Position Sensor before removing the sensor's mounting stud and sensor. Before installing the ckp sensor you must lubricate its o-ring with clean engine oil. Tighten the crankshaft position (CKP) sensor stud to a torque value of 10 n.m (89 lb in). Attach the engine harness electrical connector to the ckp sensor after which install the Exhaust Manifold.

OEM 2007 Buick Terraza Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Position Sensor found

View related parts
2007 Buick Terraza Crankshaft Position Sensor Part Number: 12598208
$24.51 MSRP: $46.02
You Save: $21.51 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Crankshaft Position Sensor; Camshaft Position Sensor; Crankshaft Sensor; Camshaft Sensor
- Replaces: 12591007
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.7 x 2.1 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12598208
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2007 Buick Terraza Crankshaft Position Sensor

With a comprehensive array of OEM 2007 Buick Terraza Crankshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Buick Terraza Crankshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Buick Terraza Crankshaft Position Sensor Parts and Q&A

Q: How to replace the Crankshaft Position Sensor on 2007 Buick Terraza?
A: Crankshaft Position Sensor replacement requires Exhaust Manifold removal first. Remove the engine harness connector from the Crankshaft Position Sensor before removing the sensor's mounting stud and sensor. Before installing the ckp sensor you must lubricate its o-ring with clean engine oil. Tighten the crankshaft position (CKP) sensor stud to a torque value of 10 n.m (89 lb in). Attach the engine harness electrical connector to the ckp sensor after which install the Exhaust Manifold.