How to replace the front wheel bearing and hub on 2007 Buick Rendezvous?

Raise your vehicle first and then proceed to remove the tire and wheel to swap the front Wheel Bearing and hub assembly. Pull out the Wheel Speed Sensor by disconnecting its electrical connector and removing it from the bracket. After that take out both the wheel drive shaft nut and brake rotor. The front hub spindle remover (J 28733-B) tool will push out the wheel drive shaft from the Wheel Bearing and hub assembly. You must replace damaged fasteners at once because they let control slip and endanger vehicle passengers. Before taking out the Wheel Bearing and hub you must throw away the old components along with the bolts. Make sure to save the wheel drive shaft outer seal (boot) as long as it stays well intact. Put the new Wheel Bearing and hub assembly in position then tighten two Wheel Bearing and hub bolts to 130 n.m (96 lb ft). Place the brake rotor and secure it with the wheel drive shaft nut using proper clip engagement on the bracket. Plug the electronic connector of the Wheel Speed Sensor back into its mounting position. After completing the operation put the tire on the wheel and let the vehicle down to the ground.

OEM 2007 Buick Rendezvous Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wheel Bearings found

View related parts
2007 Buick Rendezvous Front Hub & Bearing Part Number: 89047684
$134.18 MSRP: $262.69
You Save: $128.51 (49%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Hub Assembly, Front Wheel (W/Wheel Speed Sensor); Wheel Bearing & Hub Repair Kit.; Hub & Bearing; Hub; Hub, Front Wheel
- Position: Front
- Replaces: 10434253, 10305030, 89047802, 88955477
- Item Weight: 8.70 Pounds
- Item Dimensions: 7.0 x 7.0 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89047684
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
2007 Buick Rendezvous Hub & Bearing, Rear Part Number: 12413089
$148.02 MSRP: $438.14
You Save: $290.12 (67%)
ADD TO CART
Product Specifications
- Other Name: Hub Assembly, Rear Wheel; Wheel Bearing & Hub; Axle Bearing; Wheel Hub; Hub, Rear Wheel
- Position: Rear
- Item Weight: 9.90 Pounds
- Item Dimensions: 7.1 x 6.8 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 12413089
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
2007 Buick Rendezvous Front Hub & Bearing Part Number: 88964096
Product Specifications
- Other Name: Hub Assembly, Front Wheel; Wheel Bearing & Hub Repair Kit; Axle Bearing.; Hub & Bearing; Hub; Hub, Front Wheel
- Position: Front
- Replaces: 89047803, 12413005, 12413097
- Item Weight: 8.50 Pounds
- Item Dimensions: 7.0 x 7.0 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 88964096
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS

2007 Buick Rendezvous Wheel Bearing

With a comprehensive array of OEM 2007 Buick Rendezvous Wheel Bearing, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Buick Rendezvous Wheel Bearing are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Buick Rendezvous Wheel Bearing Parts and Q&A

Q: How to replace the front wheel bearing and hub on 2007 Buick Rendezvous?
A: Raise your vehicle first and then proceed to remove the tire and wheel to swap the front Wheel Bearing and hub assembly. Pull out the Wheel Speed Sensor by disconnecting its electrical connector and removing it from the bracket. After that take out both the wheel drive shaft nut and brake rotor. The front hub spindle remover (J 28733-B) tool will push out the wheel drive shaft from the Wheel Bearing and hub assembly. You must replace damaged fasteners at once because they let control slip and endanger vehicle passengers. Before taking out the Wheel Bearing and hub you must throw away the old components along with the bolts. Make sure to save the wheel drive shaft outer seal (boot) as long as it stays well intact. Put the new Wheel Bearing and hub assembly in position then tighten two Wheel Bearing and hub bolts to 130 n.m (96 lb ft). Place the brake rotor and secure it with the wheel drive shaft nut using proper clip engagement on the bracket. Plug the electronic connector of the Wheel Speed Sensor back into its mounting position. After completing the operation put the tire on the wheel and let the vehicle down to the ground.