OEM 2007 Buick Rendezvous Air Suspension Compressor

2007 Buick Rendezvous Air Suspension Compressor Parts and Q&A

• Q: How to replace the Air Suspension Compressor on 2007 Buick Rendezvous?

  A: The first step to replacing an Air Suspension Compressor requires lifting and supporting the entire vehicle. Gather the Air Suspension Compressor filter from its position beneath the underbody rail and take off the two air tubes from the inflator solenoid. First remove Air Suspension Compressor electrical connector and compressor brackets bolts then remove Air Suspension Compressor assembly from the vehicle. Begin by extracting the compressor wires from their connector points to the air dryer and Air Suspension Compressor bolts before finally removing the Air Suspension Compressor from its expanse along the Air Suspension Compressor bracket and bracket and bolts from the compressor motor. New installation requires inserting the bolts and bracket to the compressor before torquing the Air Suspension Compressor bolts to 6 n.m (53 lb in). Secure the Air Suspension Compressor to its bracket with Air Suspension Compressor bolts before tightening them to 6 n.m (53 lb in). Reinstall the air dryer before adding air tubes to the inflator solenoid and connecting the compressor wires into the electrical connector. The install process starts with placing the Air Suspension Compressor filter onto the underbody rail and then securing the Air Suspension Compressor bracket nuts using 10 n.m (89 lb in) torque while the Air Suspension Compressor bracket bolts receive the same 10 n.m (89 lb in) torque. The final step requires connecting the Air Suspension Compressor electrical connector followed by bracket and Air Suspension Compressor installation onto the underbody rail before lowering the vehicle.