How to replace the rear bumper reflector on 2006 Chevrolet Equinox?

The first step to replacing the rear bumper fascia reflector is to take off the rear fascia. You should first separate the reflector from its nut on the fascia.Normal ban the reflector by removing it from its fascia position. The installation requires positioning the reflector behind the rear fascia section while you must follow all instructions provided in the Cautions and Notices section. Place the reflector on the fascia nut before tightening it to 6 N.m (53 lb in). Finally, reinstall the rear fascia.

OEM 2006 Chevrolet Equinox Bumper Reflector

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Bumper Reflector found

View related parts
2006 Chevrolet Equinox Reflector, Rear Part Number: 25805313
$19.85 MSRP: $29.54
You Save: $9.69 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Reflector Assembly-Rear Bumper Fascia; Bumper Reflector; Other Lamp; Reflector, Tail Lamp/Rear End Panel Reflector; Lamp, Tail Lamp; Reflector Assembly
- Position: Rear
- Replaces: 16517435
- Item Weight: 0.40 Pounds
- Item Dimensions: 7.7 x 2.0 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 25805313
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Equinox Submodels:
- LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS

2006 Chevrolet Equinox Bumper Reflector

With a comprehensive array of OEM 2006 Chevrolet Equinox Bumper Reflector, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Equinox Bumper Reflector are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Equinox Bumper Reflector Parts and Q&A

Q: How to replace the rear bumper reflector on 2006 Chevrolet Equinox?
A: The first step to replacing the rear bumper fascia reflector is to take off the rear fascia. You should first separate the reflector from its nut on the fascia.Normal ban the reflector by removing it from its fascia position. The installation requires positioning the reflector behind the rear fascia section while you must follow all instructions provided in the Cautions and Notices section. Place the reflector on the fascia nut before tightening it to 6 N.m (53 lb in). Finally, reinstall the rear fascia.