How to replace the MAP Sensor on 2006 Chevrolet Colorado?

Replacement of MAP sensor involves disconnection of the electrical connector and removal of the retainer by clicking the locking tabs. Removing the MAP sensor, check its seal, and change in case it is spoilt. Apply Engine oil to the new seal, reattach the sensor, screw it back and reconnect the electrical connector.

OEM 2006 Chevrolet Colorado MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2006 Chevrolet Colorado M.A.P. Sensor Part Number: 19418807
$76.01 MSRP: $129.40
You Save: $53.39 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Manifold Absolute Pressure Sensor; MAP Sensor
- Replaces: 12614970, 16212460
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19418807
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2006 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS

2006 Chevrolet Colorado MAP Sensor

With a comprehensive array of OEM 2006 Chevrolet Colorado MAP Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Colorado MAP Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Colorado MAP Sensor Parts and Q&A

Q: How to replace the MAP Sensor on 2006 Chevrolet Colorado?
A: Replacement of MAP sensor involves disconnection of the electrical connector and removal of the retainer by clicking the locking tabs. Removing the MAP sensor, check its seal, and change in case it is spoilt. Apply Engine oil to the new seal, reattach the sensor, screw it back and reconnect the electrical connector.