How to replace the engine mount on 2006 Chevrolet Cobalt?

The first step to replace the Engine Mount requires air cleaner assembly removal. The engine needs support through a hydraulic floor jack that should have a wooden block placed between the jack and the Oil Pan. Begin by taking out the Engine Mount from the engine compartment after removing the Engine Mount to bracket bolts and the Engine Mount to side rail nuts. Mount the engine bracket onto the side rail studs before you can install it with side rail nuts following the specific torque sequence to 100 nm (74 ft. Lbs.). Perform the installation process of the Engine Mount to bracket bolts by using a wrench but not applying any uncalled-for pressure to the Engine Mount for hole alignment. Install and torque these bolts to a value of 50 nm (37 ft. Lbs.) while following the specified bolt order. You must finish by taking away the floor jack then reinstall the air cleaner assembly.

OEM 2006 Chevrolet Cobalt Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Engine Mounts found

View related parts
2006 Chevrolet Cobalt Mounting Bracket Part Number: 15854396
$81.92 MSRP: $128.33
You Save: $46.41 (37%)
Product Specifications
- Other Name: Adapter, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Mount Bracket; Front Mount Bracket; Adapter; Bracket, Engine Mounting
- Replaces: 22689529
- Item Weight: 1.80 Pounds
- Item Dimensions: 10.2 x 5.7 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15854396
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2006 Chevrolet Cobalt Front Mount Part Number: 25974059
Product Specifications
- Other Name: Mount; Engine Mount Bracket; Motor Mount; Mount, Engine Mounting
- Replaces: 15835311, 15939383, 15256691, 25827846
- Item Weight: 4.20 Pounds
- Item Dimensions: 6.2 x 6.2 x 11.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25974059
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2006 Chevrolet Cobalt Front Mount, Yellow Part Number: 25974058
Product Specifications
- Other Name: Mount Assembly-Engine *Yellow; Engine Mount Bracket; Motor Mount; Mount; Mount, Engine Mounting
- Replaces: 15939382, 25827845, 15256690, 15835310
- Item Weight: 4.50 Pounds
- Item Dimensions: 10.9 x 6.3 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25974058
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

2006 Chevrolet Cobalt Engine Mount

With a comprehensive array of OEM 2006 Chevrolet Cobalt Engine Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Cobalt Engine Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Cobalt Engine Mount Parts and Q&A

Q: How to replace the engine mount on 2006 Chevrolet Cobalt?
A: The first step to replace the Engine Mount requires air cleaner assembly removal. The engine needs support through a hydraulic floor jack that should have a wooden block placed between the jack and the Oil Pan. Begin by taking out the Engine Mount from the engine compartment after removing the Engine Mount to bracket bolts and the Engine Mount to side rail nuts. Mount the engine bracket onto the side rail studs before you can install it with side rail nuts following the specific torque sequence to 100 nm (74 ft. Lbs.). Perform the installation process of the Engine Mount to bracket bolts by using a wrench but not applying any uncalled-for pressure to the Engine Mount for hole alignment. Install and torque these bolts to a value of 50 nm (37 ft. Lbs.) while following the specified bolt order. You must finish by taking away the floor jack then reinstall the air cleaner assembly.