ChevyParts
My Garage
My Account
Cart
OEM 2006 Chevrolet Cobalt Alternator
Generator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Alternators found
2006 Chevrolet Cobalt Alternator Part Number: 84009358
$362.06 MSRP: $655.31You Save: $293.25 (45%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Generator Assembly; Generator, Engine Electrical
- Replaced by: 19433412
- Item Weight: 12.90 Pounds
- Item Dimensions: 9.4 x 7.9 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84009358
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2006 Chevrolet Cobalt Alternator Part Number: 84009368
Product Specifications- Other Name: Generator Assembly; Generator, Engine Electrical
- Replaces: 22731358, 22727494
- Item Weight: 14.10 Pounds
- Item Dimensions: 9.2 x 8.2 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84009368
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2006 Chevrolet Cobalt Alternator
With a comprehensive array of OEM 2006 Chevrolet Cobalt Alternator, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Cobalt Alternator are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2006 Chevrolet Cobalt Alternator Parts and Q&A
- Q: How to replace the alternator (RPOs L61/LE5) on 2006 Chevrolet Cobalt?A: The generator replacement (RPOs L61/LE5) begins with disconnecting the negative Battery Cable and removing the Drive Belt before proceeding to remove the air cleaner outlet duct. After disconnecting the generator's harness electrical connector users should move the starter solenoid wire boot and remove the generator terminal nut together with the starter solenoid wire terminal from the generator. Screwdrivers enable the removal of generator bolts allowing you to discard the generator. Install the generator by placing it on the engine block then fasten generator bolts using 22 nm (16 ft. Lbs.) torque. After connecting the starter solenoid wire terminal to the generator you must tighten the generator terminal nut to 20 nm (15 ft. Lbs.). Reinstall the air cleaner outlet duct followed by the Drive Belt then connect the electrical engine harness connector to the generator while reinstalling the starter solenoid wire boot. Reconnect the negative Battery Cable to complete the restoration.
Related 2006 Chevrolet Cobalt Parts
2006 Chevrolet Cobalt Starter
2006 Chevrolet Cobalt Alternator Bracket
2006 Chevrolet Cobalt Battery Cable
2006 Chevrolet Cobalt Battery Sensor