OEM 2006 Buick Rendezvous Throttle Body

2006 Buick Rendezvous Throttle Body Parts and Q&A

• Q: How to replace the throttle body assembly on 2006 Buick Rendezvous?

  A: Begin Throttle Body replacement by removing the air cleaner outlet duct followed by disconnecting the engine harness electrical connector from the electronic throttle control (ETC). Start the replacement process by removing the thermostat bypass pipe then the Throttle Body bolts while you unfasten the Throttle Body from its gasket. Thorough cleaning should focus on Throttle Body Gasket interfaces while eliminating all use of solvent which can damage surfaces across the Throttle Body. Also prevent the use of tools that could create damaging impacts. Installation requires a new Throttle Body Gasket followed by the Throttle Body and its bolts that should get tightened to 10 n.m (89 lb in) according to fastener notice. Reinstall the thermostat bypass pipe while connecting the engine harness electrical connector to the etc before putting on the air cleaner outlet duct.