Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2005 GMC Canyon Differential Cover

  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Differential Cover found

  • 2005 GMC Canyon Differential Cover - 12479335
    2005 GMC Canyon Differential Cover Diagram - 12479335
    View related parts

    2005 GMC Canyon Differential Cover, Rear Part Number: 12479335

    Product Specifications
    • Other Name: Cover Kit, Rear Axle Housing; Axle Cover
    • Position: Rear
    • Item Weight: 3.80 Pounds
    • Item Dimensions: 13.1 x 12.6 x 3.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 12479335
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2005 GMC Canyon Submodels:
    • SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS

2005 GMC Canyon Differential Cover

With a comprehensive array of OEM 2005 GMC Canyon Differential Cover, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 GMC Canyon Differential Cover are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 GMC Canyon Differential Cover Parts and Q&A

  • Q: How to replace the Differential Cover or Gasket on 2005 GMC Canyon?
    A: To replace the Differential carrier assembly cover or gasket first, i need to raise and support the vehicle. Next, dispose of the engine protection shield (EPS) if it exists and drain the front Differential assembly. Next, unbolt the Differential cover bolts, remembering that the front Differential housing cover gasket is reusable and will only need to be replaced if damaged. Then remove the Differential cover and gasket. For installation, replace the Differential cover and gasket to normal, taking note of the fastener notice in service precautions and torque the Differential cover bolts to 30 nm (22 ft. Lbs.). Top up the front Differential with fluid, re-install the eps if so equipped, and lastly lower the vehicle.

Related 2005 GMC Canyon Parts

Alternate Year Models

+
2004 GMC Canyon Differential Cover 2006 GMC Canyon Differential Cover