How to replace the Rack and Pinion steering gear on 2005 Chevrolet Venture?

Raise and support vehicle, remove stabilizer shaft, disconnect tie-rod ends and steering intermediate shaft. Support frame, loosen rear bolts, lower frame and powertrain, disconnect cooler pipe and pressure hose, then remove rack through left wheel opening. Install replacement in reverse order, reconnect components, refill, bleed, inspect, and adjust toe.

OEM 2005 Chevrolet Venture Rack And Pinion

Steering Rack And Pinion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Rack And Pinions found

View related parts
2005 Chevrolet Venture Gear Assembly Part Number: 26098001
Product Specifications
- Other Name: Gear Kit, Steering (Remanufacture); Steering Gear Assembly
- Item Weight: 19.10 Pounds
- Item Dimensions: 51.3 x 11.2 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26098001
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2005 Chevrolet Venture Steering Gear Part Number: 19330434
Product Specifications
- Other Name: Gear Kit, Steering (Remanufacture); Gear Assembly; Steering Gear Assembly; Gear Kit, Steering
- Replaces: 26053458
- Item Weight: 19.50 Pounds
- Item Dimensions: 50.8 x 11.0 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19330434
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS

2005 Chevrolet Venture Rack And Pinion

With a comprehensive array of OEM 2005 Chevrolet Venture Rack And Pinion, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Venture Rack And Pinion are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Venture Rack And Pinion Parts and Q&A

Q: How to replace the Rack and Pinion steering gear on 2005 Chevrolet Venture?
A: Raise and support vehicle, remove stabilizer shaft, disconnect tie-rod ends and steering intermediate shaft. Support frame, loosen rear bolts, lower frame and powertrain, disconnect cooler pipe and pressure hose, then remove rack through left wheel opening. Install replacement in reverse order, reconnect components, refill, bleed, inspect, and adjust toe.