How to replace the power mirror switch on 2005 Chevrolet SSR?

The first step to replace the power mirror switch requires the removal of the door trim panel. The first step involves letting go of the locking tabs positioned within the door trim panel before you can pull out the power mirror switch bezel . You should start by removing the power mirror switch inside the door then disconnect its electrical connector. Install the new power mirror switch by placing it inside the door trim panel before you install the power mirror bezel properly onto the door trim panel ensuring complete seating. Secure the electrical connector last before replacing the door trim panel.

OEM 2005 Chevrolet SSR Mirror Switch

Power Mirror Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Mirror Switch found

View related parts
2005 Chevrolet SSR Mirror Switch, Rear Driver Side Part Number: 10370497
Product Specifications
- Other Name: Switch, Rear View Mirror-Inside & Outside; Power Mirror Switch; Switch, Rear View Mirror - Inside & Outside
- Position: Rear Driver Side
- Replaces: 10370498
- Item Weight: 3.10 Pounds
- Item Dimensions: 8.8 x 3.4 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10370497
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet SSR Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

2005 Chevrolet SSR Mirror Switch

With a comprehensive array of OEM 2005 Chevrolet SSR Mirror Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet SSR Mirror Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet SSR Mirror Switch Parts and Q&A

Q: How to replace the power mirror switch on 2005 Chevrolet SSR?
A: The first step to replace the power mirror switch requires the removal of the door trim panel. The first step involves letting go of the locking tabs positioned within the door trim panel before you can pull out the power mirror switch bezel . You should start by removing the power mirror switch inside the door then disconnect its electrical connector. Install the new power mirror switch by placing it inside the door trim panel before you install the power mirror bezel properly onto the door trim panel ensuring complete seating. Secure the electrical connector last before replacing the door trim panel.